C11 and C13 Engines for Caterpillar Built Machines Caterpillar


Front Cover - Remove

Usage:

D8N 1XJ

Prosedur Pelepasan

Dimulai dengan:

  1. Lepaskan pompa pemindahan bahan bakar. Rujuk ke Pembongkaran dan Perakitan, "Pompa Pemindahan Bahan Bakar - Pelepasan".

  2. Lepaskan grup pemasangan penggerak kipas. Rujuk ke Pembongkaran dan Perakitan, "Grup Pemasangan Penggerak Kipas - Pelepasan dan Pemasangan".

  3. Lepaskan seal depan crankshaft. Rujuk ke Pembongkaran dan Perakitan, "Seal Depan Crankshaft - Pelepasan".


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.



PERHATIAN

Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan.




    Ilustrasi 1g01292465

  1. Lepaskan baut (1).

  2. Lepaskan baut (4).

  3. Lepaskan stud (2).

  4. Lepaskan penutup (3) dan gasket.

Caterpillar Information System:

G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Gas Pressure Regulator Condensation - Drain
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
C11 and C13 Engines Valve Actuator (Variable) - Install
C11 and C13 Engines Valve Actuator (Variable) - Remove
C9 On-highway Engines California Emission Control Warranty Statement
2004/03/01 SOLAS Requirements For Oil Lines {1307}
C9 On-highway Engines Federal Emission Control Warranty
G3500B Engines Fuel Metering Valve - Check - Raptor
2003/08/01 Update Caterpillar Electronic Technician (Cat ET) to the Newest Version {0785}
G3500B Engines Engine Protective Devices - Check
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Install
2003/09/01 Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3406 Engines Engine Oil Pan
2004/04/01 New Rocker Arm Improves Lubrication {1123}
Cat® Digital Voltage Regulator Wiring Diagrams
G3406 Engines Engine Oil Pan
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3406 Engines Engine Oil Pan
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.