Engine Oil Pan
Show/hide table
Illustration 1 | g01015118 |
(1) Gasket
Remove five eyelets from the gasket. Discard the eyelets.
(2) Bolt
-
Apply 9S-3263 Thread Lock Compound to the threads at assembly.
- Torque ... 55 ± 10 N·m (40 ± 7 lb ft)
(3) Drain plug
- Torque ... 70 ± 15 N·m (52 ± 11 lb ft)
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
2003/09/01 Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Install
C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Remove
G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Gas Pressure Regulator Condensation - Drain
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
C11 and C13 Engines Valve Actuator (Variable) - Install
2004/04/01 New Rocker Arm Improves Lubrication {1123}
Cat® Digital Voltage Regulator Wiring Diagrams
G3406 Engines Engine Oil Pan
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3406 Engines Engine Oil Pan
2003/08/04 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/10/01 Fuel Transfer System for Power Modules {1256}
2003/09/01 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
G3520C and G3520E Generator Set Engines Air/Fuel Ratio Control
2003/09/01 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
Installation Instructions for the 240-0716 Tube Kit for the High Pressure Oil Line for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the 240-0716 Tube Kit for the High Pressure Oil Line for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
G3500 Generator Sets Ignition System Timing - Check/Adjust