C11 and C13 Engines for Caterpillar Built Machines Caterpillar


Front Cover - Install

Usage:

D8N 1XJ

Prosedur Pemasangan

Tabel 1
Alat yang Diperlukan 
Alat  Nomor Suku Cadang  Keterangan Suku Cadang  Jml 
9S-3263  Senyawa Kunci Ulir 


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.




    Ilustrasi 1g01292465

    Catatan: Muka belakang penutup (3) dan muka depan rumah harus dalam keadaan bersih.

  1. Periksa kondisi gasket. Ganti gasket, jika perlu.

  2. Posisikan gasket dan penutup (3) pada rumah depan.

  3. Pasang stud (2).

    Catatan: Baut (4) adalah baut panjang. Gunakan Peralatan (A) pada ulir sebelum pemasangan.

  4. Pasang baut (4).

  5. Pasang baut (1).

Diakhiri dengan:

  1. Pasang seal depan crankshaft. Rujuk ke Pembongkaran dan Perakitan, "Seal Depan Crankshaft - Pemasangan".

  2. Pasang grup pemasangan penggerak kipas. Rujuk ke Pembongkaran dan Perakitan, "Grup Pemasangan Penggerak Kipas - Pelepasan dan Pemasangan".

  3. Pasang pompa pemindahan bahan bakar. Rujuk ke Pembongkaran dan Perakitan, "Pompa Pemindahan Bahan Bakar - Pemasangan".

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Remove
G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
3512C and 3516C Marine Auxiliary and Generator Set Engines Gas Pressure Regulator Condensation - Drain
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
C11 and C13 Engines Valve Actuator (Variable) - Install
C11 and C13 Engines Valve Actuator (Variable) - Remove
C9 On-highway Engines California Emission Control Warranty Statement
2004/03/01 SOLAS Requirements For Oil Lines {1307}
C9 On-highway Engines Federal Emission Control Warranty
2003/09/01 Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3406 Engines Engine Oil Pan
2004/04/01 New Rocker Arm Improves Lubrication {1123}
Cat® Digital Voltage Regulator Wiring Diagrams
G3406 Engines Engine Oil Pan
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3406 Engines Engine Oil Pan
2003/08/04 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/10/01 Fuel Transfer System for Power Modules {1256}
2003/09/01 There Is a New Maximum Temperature for 2W-8147 Gear {1204}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.