Engine Oil Filter Base - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position oil filter base (2) and install bolts (3).
- Install engine oil filters (1) with Tooling (A).
Show/hide table
Illustration 1 | g01082954 |
Caterpillar Information System:
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
G3500B Engines Ignition Transformer
3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
G3500 Generator Sets Engine Crankcase Breather - Clean
3056E Industrial Engine Valve Mechanism Cover
G3500 Generator Sets Engine Oil Level - Check
3056E Industrial Engine Fuel Priming Pump
G3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
3618 Engine Testing the Cooling System
3056E Industrial Engine Fuel Injection Pump
3056E Industrial Engine Fuel Injection Lines
G3600 Engines Inlet Air System - Inspect
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
2002/04/01 A New Connecting Rod Is Available {1218}
G3500 Generator Sets Overhaul (Major)
797B Off-Highway Truck Air System Control Valve (Air Dryer)
C27 and C32 Generator Set Engines Engine Oil Filter Base - Assemble
2002/06/01 Corrections to Disassembly and Assembly, RENR1333, "3618 Engine" , "Piston and Connecting Rods - Install" {1214}
Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216} Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216}
G3500 Generator Sets Plate Locations and Film Locations
G3500 Generator Sets Emergency Stopping
3412E, C30 and C32 Marine Engines System Overview
3056E Industrial Engine Fuel Filter Base