Valve Mechanism Cover
Show/hide table
| |
| Illustration 1 | g00882246 |
Show/hide table
| |
| Illustration 2 | g00882273 |
|
Numerical sequence for the bolts | |
(1) The bolts are tightened in the numerical sequence that is shown in illustration 2. Tighten the bolts to the following torque. ...
(2) O-ring for oil filler cap
(3) Valve mechanism cover
(4) Gasket
(5) Breather assembly
Caterpillar Information System:
G3500 Generator Sets Engine Oil Level - Check
3056E Industrial Engine Fuel Priming Pump
G3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
3618 Engine Testing the Cooling System
3056E Industrial Engine Fuel Injection Pump
3056E Industrial Engine Fuel Injection Lines
3054E and 3056E Industrial Engines Model View Illustrations
3618 Engine Water Temperature Regulator - Test
3618 Engine Test Tools for the Cooling System
3412E, C30 and C32 Marine Engines Engine Cranks but Will Not Start
2002/04/01 A New Housing Assembly Includes Improved Bearings For The Fresh Water Pump {1361}
3412E, C30 and C32 Marine Engines Coolant Temperature Is Too High
G3500 Generator Sets Engine Crankcase Breather - Clean
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install
G3500B Engines Ignition Transformer
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
G3600 Engines Inlet Air System - Inspect
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
2002/04/01 A New Connecting Rod Is Available {1218}
G3500 Generator Sets Overhaul (Major)
797B Off-Highway Truck Air System Control Valve (Air Dryer)
C27 and C32 Generator Set Engines Engine Oil Filter Base - Assemble