Inlet Air System - Inspect
检查空气进气系统的下列部件时可能需要使用工作台:
- 空气滤清器与涡轮增压之间的管道
- 空气管路中的橡胶管
- 涡轮增压器
- 涡轮增压器与后冷器之间的管道
- 后冷器
- 后冷器与气室间的连接
- 气室与气缸盖的连接
检查部件是否有下列情况:
- 裂纹
- 渗漏
- 连接处松动
- 碎屑
确保所有连接牢固可靠。 确保部件状态良好且没有脏物。
必要时进行修理。 有关零部件拆卸和安装的资料,参见维修手册, "拆解和组装"。 请咨询您的卡特彼勒代理商以获得帮助。
Caterpillar Information System:
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
G3500B Engines Ignition Transformer
3412E, C30 and C32 Marine Engines Marine Transmission Oil Cooler - Remove and Install
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only
G3500 Generator Sets Engine Crankcase Breather - Clean
3056E Industrial Engine Valve Mechanism Cover
G3500 Generator Sets Engine Oil Level - Check
3056E Industrial Engine Fuel Priming Pump
G3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
3618 Engine Testing the Cooling System
3056E Industrial Engine Fuel Injection Pump
C27 and C32 Generator Set Engines Engine Oil Filter Base - Disassemble
2002/04/01 A New Connecting Rod Is Available {1218}
G3500 Generator Sets Overhaul (Major)
797B Off-Highway Truck Air System Control Valve (Air Dryer)
C27 and C32 Generator Set Engines Engine Oil Filter Base - Assemble
2002/06/01 Corrections to Disassembly and Assembly, RENR1333, "3618 Engine" , "Piston and Connecting Rods - Install" {1214}
Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216} Break-In Procedure for New Cylinder Liners and Piston Rings{1215, 1216}
G3500 Generator Sets Plate Locations and Film Locations
G3500 Generator Sets Emergency Stopping
3412E, C30 and C32 Marine Engines System Overview
3056E Industrial Engine Fuel Filter Base
C18 Generator Set Engine Rating Definitions