69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Caterpillar


Sensors

Usage:

769C 01X



图 1g00679069

悬架油缸压力传感器

(1) 示意图符号

(2) 传感器

四个悬架油缸压力传感器向有效负载测量控制 (PMC) 提供输入信号。 压力传感器从有效负载操作员显示器 (POD) 上接收操作电源 (24 DCV)。 压力传感器向 PMC 发送一个方波信号,该方波信号的频率会随着悬架油缸中的压力增加而增加。 信号电压不包含信息。 PMC 测量信号的频率以确定有效负载的重量。 该传感器安装在悬架油缸的顶部。

Caterpillar Information System:

RM-350B Reclaimer/Mixer Machine Systems Steering Stops (Front) - Check and Adjust
RM-350B Road Reclaimer/Soil Stabilizer Engine Support (Front) - Remove and Install
Comfort Series Seat For Caterpillar Machines Serial Number Effectivity
C-9 Engine for MT735, MT745, MT755, MT765, MTC735, MTC745, MTC755, and MTC765 Agricultural Tractors CID 0264 FMI 08 Decel Throttle Position signal abnormal
2002/04/29 A New Rear Wheel Improves the Service Life {4001, 4201}
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Stabilizer System
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Power Train Transmission Power Flow
2002/07/08 Special Instruction, REHS1276, "Conversion of the Joystick from Fork Control to Bucket Control" is now Available {5063, 5705, 6107}
2003/03/03 New Automatic Brake Application Switches Available {1408}
RM-350B Reclaimer/Mixer Machine Systems Power Shift Transmission (Propel) and Rotor Transmission Pressure - Test
RM-350B Reclaimer/Mixer Machine Systems Relief Valve (Priority Valve) - Test and Adjust
PS-150B and PS-200B Paving Compactors Lubricant Viscosities
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Hydraulic System Pump Performance (Implement) - Test
Contour Series Seat Air Suspension With Air Valve Knob Height Adjustment - Assemble
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Engine and Machine Warm-Up
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt Cylinder - Remove
2002/04/29 A New Hub and an Updated Spindle Improve the Service Life of the Bearings {4001, 4201}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt Cylinder - Install
2011/10/06 The Part Numbers for the Electronic Controls Have Changed {7600, 7610, 7620}
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System Transmission Does Not Upshift
Caterpillar Monitoring System Normal Mode
Caterpillar Monitoring System Service Meter Mode
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Load Indicator Light
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Instrument Panel (Lower) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.