Instructions for Updating the CABSDos Software and Reinstalling the CABSDos Software{7610, 7620} Caterpillar

Harvester Heads:

HH45 (S/N: CFE1-UP)

HH55 (S/N: CFS1-UP)

HH65 (S/N: CKJ1-UP)

HH75 (S/N: CKW1-UP)

Wheel Harvesters:

550 (S/N: 7ZN1-UP)

570 (S/N: 4XR1-UP)

580 (S/N: 7CN1-UP)

Introduction

Illustration 1	g00892064
CABSDos Presentation and Programming Unit (1) "Caps Lock". (2) "Escape". (3) "Space". (4) "Enter".

This Special Instruction provides the necessary guidelines for updating the software for CABSDos.

Do not perform any procedure that is outlined in this publication until you understand the information that is contained in the document.

Required Parts for Reinstalling the CABSDos Software

Table 1

Parts List
Quantity	Pt. No.	Description
1	208-2382	Electronic Software (1)
1	215-4152	CABSDos Basic (2)
1	215-4153	CABSDos Machine (2)
1	205-4662	Program Card (3)

( 1 )	Electronic Software contains the following files: 215-4152 CABSDos Basic and 215-4153 CABSDos Machine
( 2 )	Supplied with 208-2382 Electronic Software
( 3 )	Supplied with the CABSDos Operating System

Note: Both of the 215-4152 CABSDos Basic Software and the 215-4153 CABSDos Machine Software are available on SIS Web as 208-2382 Electronic Software . Search for the file part numbers by clicking on the web link that is in illustration 2. The 208-2382 Electronic Software will be available as a ".zip" file. You must download the file to your computer first. You must then unzip the files and transfer the files onto the 205-4662 Program Card prior to the update process.

Illustration 2	g00891975
SIS Web Screen

Note: Before you start the upgrade process, you must copy the 215-4152 CABSDos Basic Software and the 215-4153 CABSDos Machine Software to the 205-4662 Program Card .

Note: Only use the CABSDos presentation and programming unit to format the 205-4662 Program Card . If CABSDos is not used in order to perform a format, the card will not be recognized by CABSDos.

Preparation of the Machine

1. Park on a level surface.

2. Lower the harvester head to the ground.

3. Turn the engine start switch to the OFF position.

4. Turn the engine start switch to the ON position.

5. Activate the CABSDos controller by turning the boom switch to the ON position.

Procedure to Update the CABSDos Operating System

Note: Start at ""Procedure to Update the CABSDos Operating System" " if you wish to only perform an update to the CABSDos operating system. Start at Step ""Installation of the CABSDos Software" " if you must completely reinstall the CABSDos operating system software.

The following steps will save the "Machine Settings" folder to the 205-4662 Program Card .

Show/hide table



Illustration 3	g00912126
"Administration" Menu (4) "System".

1. Press the "Space" button on the presentation and programming unit in order for the "Administration" Menu to appear.

2. Press button "4" in order to access the "System" menu.

Show/hide table



Illustration 4	g00912127
"System" Menu (3) "File handler".

3. Press button "3" in order to access the "File Manager" menu.

Show/hide table



Illustration 5	g00912129
"File Manager" Menu (2) "Safe Copy".

4. Press button "2" in order to access the "Safe Copy" menu.

Show/hide table



Illustration 6	g00884924
Program Card Location

5. Insert the 205-4662 Program Card into slot F that is located on the right side of the presentation and programming unit.

   Note: You must insert the 205-4662 Program Card into slot F only. Copying can only be performed from this slot.

Show/hide table



Illustration 7	g00912130
(1) "Backup".

6. Select "Backup" by pressing button "1". The following screen will appear.

Show/hide table



Illustration 8	g00912135
Backup Progress Screen

7. CABSDos will now backup to the 205-4662 Program Card .

8. When the files have completed the process, the screen will disappear. The "Safe Copy" menu will reappear. You may now remove the 205-4662 Program Card .

9. You must now exit the CABSDos operating system. From the "Safe Copy" menu, press the "Esc" button two times in order for the "System" menu to appear.

Show/hide table



Illustration 9	g00912136
"System" Menu (5) "Exit".

10. Press button "5" in order exit CABSDos.

11. Turn the CABSDos controller off by turning the boom switch to the OFF position.

12. Turn the engine start switch to the OFF position.

Show/hide table



Illustration 10	g00812324
Battery Disconnect Switch Location

13. Shut down the CABSDos operating system by turning the battery disconnect switch that is on the machine to the OFF position.

Installation of the CABSDos Software

Format the Operating System

Note: Start at ""Installation of the CABSDos Software" " if you must completely reinstall the CABSDos operating system software. If you choose to do a complete installation to the CABSDos operating system, you can not restore your system settings after you reboot the CABSDos computer.

Note: Only perform the following steps if you intend to completely reinstall the CABSDos software. The following steps will format the hard drive, and all of the data that is stored on the hard drive will be lost. Do not perform Step 2 through Step 9 if you only intend to update the existing CABSDos software.

1. If you are performing a full installation of the CABSDos software, perform Step 2 through Step 9 in order to format the hard drive prior to the new software installation.

Show/hide table



Illustration 11	g00884924

2. Insert the 205-4662 Program Card into slot F that is located on the right side of the presentation and programming unit.

Show/hide table



Illustration 12	g00812324
Battery Disconnect Switch Location

3. Start the CABSDos operating system by turning the battery disconnect switch that is on the machine to the ON position.

4. Turn the engine start switch to the ON position.

5. Turn the CABSDos controller on by turning the boom switch to the ON position. The following screen will appear.

Show/hide table



Illustration 13	g00912312
Installation Language Selection Screen Typical Example (1) "Swedish". (2) "English". (3) "German". (4) "Russian". (5) "French".

6. A language selection screen will appear. Select the appropriate installation language by pressing the number that is next to the language.

   Note: The language that is selected is only the language of the installation process. The installation language is not the language of the operating system. All of the operating system languages will be installed automatically.

7. After you have selected the proper installation language, press the "Enter" button. The following screen will appear.

Show/hide table



Illustration 14	g00912282

8. This screen will ask you if you wish to format the "C" drive. Press "Enter" in order to proceed with the format. The following confirmation screen will appear.

Show/hide table



Illustration 15	g00923583

9. This screen will ask you to confirm your selection to format the "C" drive. Press button "1" in order to continue. A progress screen will appear.

   Note: If you only intend to perform an update to the existing CABSDos software, you must press the "ESC" button in order to avoid formatting the "C" drive.

Show/hide table



Illustration 16	g00912315

10. This screen will appear momentarily while the CABSDos operating system is formatted. When the CABSDos operating system has finished the format process, the following screen will appear. This screen will display the progress for replacing the existing operating system with a new operating system.

    Note: The format "C" drive progress screen will immediately be followed by the operating system update screen.

Update the Operating System

Show/hide table



Illustration 17	g00912314
CABSDos Operating System Update Screen

1. At this screen, the new operating system will be installed. After the new operating system is installed, the following screen will appear.

   Note: The operating system progress screen will immediately be followed by the "CABSDos Basic" update screen.

CABSDos Basic Update

Show/hide table



Illustration 18	g00912317
CABSDos Basic Update Screen

1. This screen will display the progress of the "CABSDos Basic" installation. When the installation has completed, the following screen will appear.

   Note: The "CABSDos Basic" progress screen will immediately be followed by the "CABSDos Machine" update screen.

CABSDos Machine Update

Show/hide table



Illustration 19	g00878688
CABSDos Machine Update Screen

1. This screen will display the progress of the "CABSDos Machine" installation. When the installation has completed the following screen will appear.

   Note: The "CABSDos Machine" progress screen will immediately be followed by the "Head Type" update screen.

Update the Head Type

Show/hide table



Illustration 20	g00878702
(ENTER) "OK".

1. Press "Enter" in order to continue onto selecting the proper harvester head.

Show/hide table



Illustration 21	g00912320
"Head Selection" Screen Typical Example

2. Place the cursor on the left side of the harvester head that is on your machine.

   Note: If the wrong harvester head is selected the procedure must be started again.

3. Press "Enter" when you have made the proper selection.

4. The following screen will ask you if you want to update the "Head Type" software.

Show/hide table



Illustration 22	g00878741
"Head Type Update" Screen (1) "OK".

5. Press button "1" in order to update the "Head Type".

   Note: The head type selection must be performed in order to ensure that the latest software is installed.

Show/hide table



Illustration 23	g00912318
Typical Example

6. This screen will appear for a short amount of time that will indicate the process of the software installation.

7. The following screen will inform you that you must update the AGI file.

Update the AGI Program File

Show/hide table



Illustration 24	g00878763
(ENTER) "OK".

1. Press the "Enter" button in order to continue onto updating the AGI file.

Show/hide table



Illustration 25	g00878770
"AGI Selection" Screen

2. You have a choice of two configuration files, "AGISE4" and "AGISE7".

   Note: The normal AGI file that is selected is "AGISE4".

   Note: "AGISE4" will cause the + and - keys to change the length only on the matrix that you currently do your bucking on. "AGISE7" will cause the + and - keys to change the length on all of the matrices that are allowed to compare with the one that you work with.

3. Move the cursor over the correct file.

4. Press the "Enter" button.

5. The following screen will ask you if you want to update the AGI File software.

Show/hide table



Illustration 26	g00878779
"AGI File Update" (1) "OK".

6. Press button "1" in order to update the AGI File.

7. The following screen will inform you that you must update the CU Program.

Update the CU Program File

Show/hide table



Illustration 27	g00878815
"Updating CU Program" Screen (ENTER) "OK".

1. Press the "Enter" button in order to continue onto updating the CU Program.

Show/hide table



Illustration 28	g00912336
"CU Program Selection" Screen

2. You have a choice of two configuration files, "ESEC1_67" and "ESEC2_10".

   Note: The normal CU Program file that is selected is "ESEC2_10". "ESEC1_67" is the old version of the software. "ESEC2_10" is the new version of the software. "ESE1_67" is included if the user wishes to not upgrade the "CU" program.

3. Place the cursor on "ESEC2_10".

4. Press the "Enter" button.

5. The following screen will ask you if you want to update the CU Program software.

Show/hide table



Illustration 29	g00878830
"CU Program Update" (1) "OK".

6. Press button "1" in order to update the operating system with the new software.

7. The following screen will appear. The program is now updating the CABSDos operating system.

Programming the CABSDos Operating System

Show/hide table



Illustration 30	g00878834
"Flash Programming"

Show/hide table



Illustration 31	g00878838
"Update Process OK" Screen

1. The message screen will appear and you must remove the 205-4662 Program Card .

2. The CABSDos computer will now perform an automatic reboot.

3. A screen will appear at the initial start-up of the operating system. Compare the "esemain.ini" file and the "esemain.def" file and make sure that the new software version is shown on the screen.

Confirming a Successful Update

Illustration 32	g00878856
CABSDos Start-up Screen

1. This screen is displayed after the CABSDos restarts. At this screen, the CABSDos will load the ".ini" files.

Initial Login

Show/hide table



Illustration 33	g00878861
Login Screen Typical Example

1. The password login screen will appear. Enter the password for the operating language. Enter one of the following passwords:
   • Enter 1111 for Swedish users.

   • Enter 2222 for English users.

   • Enter 3333 for German users.

   • Enter 4444 for Russian users.

   • Enter 5555 for French users.

2. The language that you select will guide you through the remainder of the installation. The following screen will appear.

Show/hide table



Illustration 34	g00912490
"Administration" Menu (4) "System".

3. This screen will indicate the initial settings that CABSDos is currently using. The following steps will illustrate how to change the current settings. This screen will only appear momentarily.

Selecting Operators

Show/hide table



Illustration 35	g00912450
Operation Screen Typical Example

1. When the operation screen appears, press the "Space" button.

2. After you press the "Space" button, the "Administration" menu will appear.

Show/hide table



Illustration 36	g00912133
"Administration" Menu (4) "System".

3. Press button "4" in order to access the "System" menu.

4. The "System" menu will appear.

Show/hide table



Illustration 37	g00912502
"System" Menu (2) "Operator".

5. Select "Operator" by pressing button "2" on the presentation and programming unit.

6. The "Operator" menu will appear.

Show/hide table



Illustration 38	g00912534

7. Select "Select" by pressing button "1". This must be performed in order to change the operator parameters. The following screen will appear.

Show/hide table



Illustration 39	g00912637
Typical Example

8. You must select the operator that you wish to change settings on. Press the button that corresponds to the number that is to the left of the operator. You will be returned to the previous screen when you are finished.

   Note: From the current operator screen, you must ensure that the proper operator was selected in Step 8.

Show/hide table



Illustration 40	g00912513

9. Select "Edit" by pressing button "2".

Show/hide table



Illustration 41	g00912515
Typical Example

10. After you select the "Edit" option, you must enter the current operator password. You will proceed to a slightly different screen where you may now change the specific operator parameters.

Show/hide table



Illustration 42	g00912719

11. Select "Language" by pressing option "1". The following screen will appear. This will allow you to change the language that is used for the specified operator.

Show/hide table



Illustration 43	g00912645
Typical Example

12. Select the proper language for the operator. Enter one of the following options as shown in Illustration 43. After you select the proper language, you will be returned to the previous screen.

Show/hide table



Illustration 44	g00912504
"Operator" Menu (2) "Tgt".

13. Select "Tgt" by pressing button "2" on the presentation and programming unit. This function will allow you to configure CABSDos for the type of joysticks that your machine is equipped with. The following screen will appear.

Show/hide table



Illustration 45	g00912508
"Tgt" File Selection Typical Example

14. Select the proper joysticks that are on your machine. The two main options are standard configuration and mini configuration.

    Note: The "FI" extension behind a file indicates that the file is used only for Finland configurations.

15. Place the cursor next to the file that matches your joystick configuration, and press "Enter". You will be retuned to the previous screen.

Show/hide table



Illustration 46	g00912553
"Operator" Menu (3) "Mas".

16. Select "Mas" by pressing button "3" on the presentation and programming unit.

Show/hide table



Illustration 47	g00912550
"Mas File" Selection Typical Example

17. Place the cursor to the left of the harvester head that is on your machine.

18. Press the "Enter" button. You will be returned to the previous screen.

19. Press the "ESC" button two times in order to return to the "System" menu.

Show/hide table



Illustration 48	g00912136
"System" Menu (5) "Exit".

20. Select "Exit" from the "System" menu by pressing button "5".

Show/hide table



Illustration 49	g00912135
Backup Progress Screen

21. The CABSDos computer will now perform an internal backup of the new settings.

    Note: After all of the initial settings have been made, the computer will take more time in order to save the settings. The computer will perform a full backup of the updated operating system.

22. Turn the CABSDos controller off by turning the boom switch to the OFF position.

23. Turn the engine start switch to the OFF position.

Show/hide table



Illustration 50	g00812324
Battery Disconnect Switch Location

24. Shut down the CABSDos operating system by turning the battery disconnect switch that is on the machine to the OFF position.

Show/hide table



Illustration 51	g00812324
Battery Disconnect Switch Location

25. Start the CABSDos operating system by turning the battery disconnect switch that is on the machine to the ON position.

26. Turn the engine start switch to the ON position.

27. Turn the CABSDos controller on by turning the boom switch to the ON position.

Restore the Operating System Files

Note: This section should only be performed if you previously elected to only update the CABSDos operating system.

This operation will restore your saved files from the 205-4662 Program Card .

Show/hide table



Illustration 52	g00884924
Program Card Location

1. Insert the 205-4662 Program Card into slot F that is located on the right side of the presentation and programming unit.

Show/hide table



Illustration 53	g00912133
"Administration" Menu (4) "System".

2. Press the "Space" button in order for the "Administration" Menu to appear.

3. Press button "4" in order to access the "System" Menu.

Show/hide table



Illustration 54	g00912127
"System" Menu (3) "File handler".

4. Select "File Manager" from the "System" menu by pressing button "3".

Show/hide table



Illustration 55	g00912129
"File Manager" Menu (2) "Safe Copy".

5. Select "Safe Copy" from the "File Manager" menu by pressing button "2".

Show/hide table



Illustration 56	g00912575
(2) "Restore".

6. Select "Restore" by pressing button "2". A screen will appear that will ask you to confirm that you wish to "Restore" your files.

Show/hide table



Illustration 57	g00884931
"Warning Screen" (1) "OK".

7. Press button "1" in order to proceed with the restoration of your files. The following screen will appear.

Show/hide table



Illustration 58	g00884927
"Safe Copy Screen"

8. When the files have completed the process, the screen will disappear. You may now remove the 205-4662 Program Card .

9. Turn the boom switch to the OFF position.

Show/hide table



Illustration 59	g00812324

10. Shut down the CABSDos operating system by turning the battery disconnect switch that is on the machine to the OFF position.