Engine Oil Level - Check
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage. |
Show/hide table
 | |
| Illustration 1 | g00110524 |
- Open the engine access door on the right side of the machine. The engine oil dipstick (2) is located on the right side of the machine.
- While the engine is stopped, maintain the oil level at the "FULL" mark on the engine oil dipstick (2) .
Show/hide table
 | |
| Illustration 2 | g00877037 |
- If necessary, remove the engine oil filler cap (1) and add oil.
- Clean the engine oil filler cap and install the engine oil filler cap.
- Close the engine access door.
Caterpillar Information System:
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0709 - FMI 03
3056E Industrial Engine Crankshaft Seals
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1428 - FMI 03
247 and 257 Multi Terrain Loaders Loader Frame
3056E Industrial Engine Water Temperature Regulator
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0673 - FMI 08
3056E Industrial Engine Engine Oil Pan
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1427 - FMI 06
3054E Industrial Engine Engine Oil Pressure
3056E Industrial Engine Engine Oil Pump
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Brake Accumulator - Check
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0673 - FMI 02
RM-350B Reclaimer Mixer Machine Electronic Control System Using Caterpillar Monitoring System to Determine Diagnostic Codes
2002/06/24 Correction to Specifications , "Pressure Control Valve (Transmission)" {3074}
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0709 - FMI 05
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0709 - FMI 06
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Transmission Charging Pump Pressure - Test
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0826 - FMI 03
Instructions for Updating the CABSDos Software and Reinstalling the CABSDos Software{7610, 7620} Instructions for Updating the CABSDos Software and Reinstalling the CABSDos Software{7610, 7620}
2002/05/27 Preparation of Air Conditioner Units for Seasonal Use {7320}
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0826 - FMI 04
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 0967 - FMI 02
2002/04/01 Change to Specifications Manual {1157}
Installation Procedure for Installing a Blade on 574 Forwarders{6060} Installation Procedure for Installing a Blade on 574 Forwarders{6060}