- Engine: Machine with Electronic Unit Injection
- 3500 Series
- Engine: Machine
- 3500B Series
- 3500 Series
Some Service Manual Modules for the engines in these machines may include an incorrect torque for the locknut for the adjusting screw for the fuel injector rocker arm.
Illustration 1 | g00792095 |
This illustration identifies the components that are used to adjust the lash of the fuel injector rocker arm. (1) Adjusting screw (2) Locknut (3) Fuel injector rocker arm |
3500 Series Engines With EUI
Tighten the locknut (2) for the adjusting screw (1) for the fuel injector rocker arm (3) to a torque of 70 ± 15 N·m (50 ± 11 lb ft). Please make a note about this information in the applicable Service Manual Modules.
3500B Series Engines
Tighten the locknut (2) for the adjusting screw (1) for the fuel injector rocker arm (3) to a torque of 120 ± 15 N·m (90 ± 11 lb ft). Please make a note about this information in the applicable Service Manual Modules.