Burner Blower Motor - Remove and Install
Removal Procedure
- Extend the extender. Remove ten bolts (1) and cover (2) .
Show/hide table
Illustration 1 | g00792083 |
Note: Use Step 1 in order to remove the blower motor from the extender.
- Disconnect electrical connector (3) .
Show/hide table
Illustration 2 | g00792295 |
- Remove two bolts (5) and blower motor (4) .
- Remove two screws (6) and screen (7) .
Show/hide table
Illustration 3 | g00792342 |
- Loosen set screw (8) and remove blower wheel (9) .
Show/hide table
Illustration 4 | g00792344 |
- Remove four bolts (10) and plate (11) .
- Remove four screws (12) and remove the blower motor from housing (13) .
Show/hide table
Illustration 5 | g00792345 |
Installation Procedure
- Install the blower motor in housing (13) and install four screws (12) .
Show/hide table
Illustration 6 | g00792345 |
- Install blower wheel (9) and tighten set screw (8) .
Show/hide table
Illustration 7 | g00792344 |
- Install plate (11) and four bolts (10) .
- Install screen (7) and two screws (6) .
Show/hide table
Illustration 8 | g00792342 |
- Install blower motor (4) and four bolts (5) .
Show/hide table
Illustration 9 | g00792295 |
- Connect electrical connector (3) .
- Install cover (2) and ten bolts (1). Retract the extender.
Show/hide table
Illustration 10 | g00792083 |
Note: Use Step 7 only if the blower motor has been removed from the extender.
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Track-Type Skidder
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Additional Operator Modes
TK1051 Track Feller Buncher Swing Drive Oil - Change
2001/04/23 A New Valve Cover Gasket is Now Used on 3054 and 3056 Machine Engines {1107}
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Hydraulic and Steering System
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Hydraulic System Oil Filter - Replace
2002/11/04 Improved Components Are Available For The Hoist Cylinders On 797 Off-Highway Trucks {5102}
Product Identification Numbers (PIN) Location Guide Motor Grader
2001/06/18 Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Travel Motor
TH103 Telehandler Hydraulic System Access Platform System
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 03
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Air Filter Primary Element - Clean/Replace
Product Identification Numbers (PIN) Location Guide Wheel Tractor-Scraper
Product Identification Numbers (PIN) Location Guide Bucket
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 05
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 06
CP-323C and CS-323C Paving Compactors Rollover Protective Structure (ROPS) - Inspect
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Hydraulic System Oil Level - Check
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0643 - FMI 03
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0643 - FMI 05
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0643 - FMI 06
AS2301 Screed Burner Group (Extender) - Remove
Product Identification Numbers (PIN) Location Guide Bulldozer