Hydraulic System Oil Filter - Replace
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
 | |
| 图 1 | g01063216 |
Show/hide table
 | |
| 图 2 | g00792496 |
液压油滤清器位于液压油箱内。 液压油箱位于机器右侧的平台后面。
- 拆下螺栓 (2) 并将平台 (1) 拆离机器。
- 从每个盖 (4) 上拆下 4 颗螺栓 (3) 。 拆下两个盖。
- 拆下滤清器滤芯。 废弃旧滤芯。
- 清洁盖。 检查密封件的情况。 必要时，更换这些部件。
- 安装新滤清器滤芯并安装盖。 拧紧螺栓至扭矩 58 ± 4 N·m (42.8 ± 2.9 lb ft)。
- 检查液压油箱的油位。 如有必要，则加油。
- 关闭平台并安装螺栓。
Caterpillar Information System:
2002/11/04 Improved Components Are Available For The Hoist Cylinders On 797 Off-Highway Trucks {5102}
Product Identification Numbers (PIN) Location Guide Motor Grader
2001/06/18 Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Travel Motor
TH103 Telehandler Hydraulic System Access Platform System
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 03
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 06
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 05
2001/04/30 Replacement Of The Brush, The Brush Retainer, And The Brush Support For The Generator {4450}
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Hydraulic System Oil - Change
2001/05/07 Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 03
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Hydraulic and Steering System
2001/04/23 A New Valve Cover Gasket is Now Used on 3054 and 3056 Machine Engines {1107}
TK1051 Track Feller Buncher Swing Drive Oil - Change
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Additional Operator Modes
Product Identification Numbers (PIN) Location Guide Track-Type Skidder
AS2301 Screed Burner Blower Motor - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Air Filter Primary Element - Clean/Replace
Product Identification Numbers (PIN) Location Guide Wheel Tractor-Scraper
Product Identification Numbers (PIN) Location Guide Bucket
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 05
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 06
CP-323C and CS-323C Paving Compactors Rollover Protective Structure (ROPS) - Inspect