Travel Motor
Show/hide table
Illustration 1 | g00813562 |
Pump rotation is bidirectional.
Relief valve setting ... 37500 kPa (5450 psi)
Minimum displacement ... 64 cc/rev
Maximum displacement ... 107 cc/rev
(1) Torque for two locknuts ... 69 N·m (51 lb ft)
(2) 124-9914 Shim ... 3.0 mm (.118 inch)
(3) Use necessary shims to adjust the clearance when the rotating group is installed in the housing.
- 124-9932 Shim ... 3.5 mm (.138 inch)
- 124-9933 Shim ... 3.6 mm (.142 inch)
- 124-9934 Shim ... 3.7 mm (.146 inch)
- 124-9935 Shim ... 3.8 mm (.150 inch)
- 124-9936 Shim ... 3.9 mm (.154 inch)
- 124-9937 Shim ... 4.0 mm (.158 inch)
- 124-9933 Shim ... 3.6 mm (.142 inch)
(4) Torque for two plugs ... 50 N·m (37 lb ft)
Caterpillar Information System:
TH103 Telehandler Hydraulic System Access Platform System
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0642 - FMI 03
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 06
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 05
2001/04/30 Replacement Of The Brush, The Brush Retainer, And The Brush Support For The Generator {4450}
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Hydraulic System Oil - Change
2001/05/07 Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0641 - FMI 03
Product Identification Numbers (PIN) Location Guide Pipelayer
AS2301 Screed Screed Plate (Extender) - Remove and Install
TH103 Telehandler Hydraulic System Pilot Hydraulic System
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fuses - Replace
2001/06/18 Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
Product Identification Numbers (PIN) Location Guide Motor Grader
2002/11/04 Improved Components Are Available For The Hoist Cylinders On 797 Off-Highway Trucks {5102}
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Hydraulic System Oil Filter - Replace
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Hydraulic and Steering System
2001/04/23 A New Valve Cover Gasket is Now Used on 3054 and 3056 Machine Engines {1107}
TK1051 Track Feller Buncher Swing Drive Oil - Change
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Additional Operator Modes
Product Identification Numbers (PIN) Location Guide Track-Type Skidder
AS2301 Screed Burner Blower Motor - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Air Filter Primary Element - Clean/Replace
Product Identification Numbers (PIN) Location Guide Wheel Tractor-Scraper