Fuel System - Prime
Show/hide table
| |
| Illustration 1 | g00791684 |
The priming pump is located on the right side of the machine in the engine compartment.
- Your machine is equipped with an electric fuel pump. The toggle switch (1) for the electric fuel pump is located near the fuel filter on the right side of the engine.
- A plug (2) is located on the secondary filter. The plug is used in order to purge air from the fuel lines.
- Use the toggle switch in order to operate the electric fuel pump. Open the plug. Operate the fuel priming pump until no air bubbles are present from the plug.
- Tighten the plug when air bubbles are no longer present. Turn off the fuel priming pump.
If the engine does not start or the engine misfires, further priming is necessary.
Caterpillar Information System:
770 and 772 Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Planetary
533 and 543 Wheel Feller Bunchers Engine Stopping
735 Articulated Truck Power Train Torque Converter
TH103 Telehandler Hydraulic System Auxiliary System
740 and 740 EJECTOR Articulated Trucks Power Train Torque Converter
TH103 Telehandler Hydraulic System Frame Leveling System
735 Articulated Truck Power Train Differential - Test
2001/04/23 A New Flash File Is Used on the Electronic Control Module of Wheel Harvesters {7490, 7620}
TK1051 Track Feller Buncher Fuses - Replace
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Related Components
3054 Engine Cooling System - Check
769D Off-Highway Truck and 771D Quarry Truck Air Dryer Desiccant - Replace
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve - Test
2001/12/10 Bearing Replacement For The Generator {4450}
2001/08/06 Repair for Exhaust Manifold Studs on 3306 Engines {1059}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3054 Engine Increased Engine Oil Temperature - Inspect
TK1051 Track Feller Buncher Machine System Control Valve (Main)
769D Off-Highway Truck and 771D Quarry Truck Air Tank Moisture and Sediment - Drain
CB-334D and CB-335D Vibratory Compactors Hood Tilting
735 Articulated Truck Aftercooler Core - Inspect/Clean
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Ether Starting Aid Cylinder - Replace
769D Off-Highway Truck/Tractor and 771D Quarry Truck Engine Air Precleaner - Clean