740 and 740 EJECTOR Articulated Trucks Power Train Caterpillar


Transmission Planetary

Usage:

740 AXM



图 1g00791642

(1) 离合器 1

(2) 离合器 2

(3) 离合器 3

(4) 离合器 4

(5) 离合器 5

(6) 离合器 6

(7) 离合器 7

(8) 传感器(输出转速)

(9) 输出轭

(10) 轴(变矩器的输入)

行星变速箱有 7 个前进档速度档和 2 个倒档速度档。

注: 在机器 AXM、AWR 和 AZZ 上,只使用了一个倒档速度档。

行驶速度较低时,第一档速度档使用变矩器驱动。 行驶速度较高时,第一档速度档使用直接驱动。 当行驶速度以第一档速度档增加时,变矩器的锁止离合器接合。 这为第一档速度档提供了直接驱动。 对于第二档至第七档之间的速度档,变矩器通常为直接驱动,但当离合器在行星变速箱中接合时,变矩器驱动时间较短。 当选择倒档速度档时,使用变矩器驱动。 变速箱换档期间变矩器锁止离合器分离,以便提供平稳换档。 下列表格显示了各台机器的每个速度档接合的离合器。

表 1
档位选择 (1)    
速度档     接合的离合器    
空档     1    
倒档速度档     3 和 7    
第一速度档     2 和 6    
第二速度档     1 和 6    
第三速度档     3 和 6    
第四速度档     1 和 5    
第五速度档     3 和 5    
第六速度档     1 和 4    
第七速度档     3 和 4    
( 1 ) 下表包含了 AXM1-以上、, AWR1-以上和, AZZ1-以上的信息。

表 2
档位选择 (2)    
速度档     接合的离合器    
空档     1    
第一倒档速度档     1 和 7    
第二倒档速度档     3 和 7    
第一速度档     2 和 6    
第二速度档     1 和 6    
第三速度档     3 和 6    
第四速度档     1 和 5    
第五速度档     3 和 5    
第六速度档     1 和 4    
第七速度档     3 和 4    
( 2 ) 下表包含了 B1N1-以上、, B1P1-以上和, B1R1-以上的信息。

行星变速箱是两个旋转离合器、五个固定离合器和五个行星装置的组合。 这提供了七个前进速度档和一个倒档速度档。 3 号离合器 (3) 和 4 号离合器 (4) 均为旋转离合器。

行星变速箱用螺栓连接到变矩器壳体。 轴 (10) 是变矩器的一部分,该轴向行星变速箱传递扭矩。 行星变速箱的输出轭 (9) 用螺栓连接到主驱动轴。 主驱动轴连接行星变速箱和输出分动器。

传感器 (8) 测量行星变速箱的输出转速。 有两个传感器,以便在一个传感器发生故障的情况下提供备用传感器。 传感器向 ECM(电子控制模块)发送有关变速箱输出转速的信息。

Caterpillar Information System:

533 and 543 Wheel Feller Bunchers Engine Stopping
735 Articulated Truck Power Train Torque Converter
TH103 Telehandler Hydraulic System Auxiliary System
740 and 740 EJECTOR Articulated Trucks Power Train Torque Converter
TH103 Telehandler Hydraulic System Frame Leveling System
735 Articulated Truck Power Train Differential - Test
2001/04/23 A New Flash File Is Used on the Electronic Control Module of Wheel Harvesters {7490, 7620}
TK1051 Track Feller Buncher Fuses - Replace
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Related Components
3054 Engine Cooling System - Check
3056 Engine for Caterpillar Built Machines Cooling System - Test
TK1051 Track Feller Buncher Fuel System Filter - Replace
770 and 772 Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fuel System - Prime
769D Off-Highway Truck and 771D Quarry Truck Air Dryer Desiccant - Replace
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve - Test
2001/12/10 Bearing Replacement For The Generator {4450}
2001/08/06 Repair for Exhaust Manifold Studs on 3306 Engines {1059}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3054 Engine Increased Engine Oil Temperature - Inspect
TK1051 Track Feller Buncher Machine System Control Valve (Main)
769D Off-Highway Truck and 771D Quarry Truck Air Tank Moisture and Sediment - Drain
CB-334D and CB-335D Vibratory Compactors Hood Tilting
735 Articulated Truck Aftercooler Core - Inspect/Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.