Fuses - Replace
The fuse panel is located inside the right side of the cab. Open the access cover for fuse access.
Show/hide table
Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and/or repair the circuit. |
Show/hide table
NOTICE |
---|
Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result. |
Show/hide table
NOTICE |
---|
If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer. |
The following list identifies the circuits that are protected by each fuse. The amperage for each fuse is included with each circuit.
Show/hide table
Illustration 1 | g00791523 |
Show/hide table
Instrument Lights (1) - 15 amperes |
Show/hide table
Circulation Fan (2) - 10 amperes |
Show/hide table
Converter (3) - 10 amperes |
Show/hide table
Electronic Monitoring Panel (4) - 10 amperes |
Show/hide table
Spare (5) - 10 amperes |
Show/hide table
Ignition Key (6) - 10 amperes |
Show/hide table
Cigar Lighter (7) - 15 amperes |
Show/hide table
Radio (8) - 10 amperes |
Show/hide table
Service Lights (9) - 10 amperes |
Show/hide table
Converter (10) - 15 amperes |
Show/hide table
Working Lights (11) - 15 amperes |
Show/hide table
Working Lights (12) - 15 amperes |
Show/hide table
Cab Dome Lights (13) - 10 amperes |
Show/hide table
Horn (14) - 10 amperes |
Show/hide table
Working Lights (15) - 15 amperes |
Show/hide table
Tilt Control (16) - 10 amperes |
Show/hide table
ADEM III Engine Control (17) - 15 amperes |
Show/hide table
Disc Saw Blade (18) - 10 amperes |
Show/hide table
Air Conditioner (19) - 10 amperes |
Show/hide table
Spare (20) - 10 amperes |
Caterpillar Information System:
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Related Components
3054 Engine Cooling System - Check
3056 Engine for Caterpillar Built Machines Cooling System - Test
TK1051 Track Feller Buncher Fuel System Filter - Replace
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fan Drive Bearing - Lubricate
3176C and 3406E Engines for Caterpillar Built Machines System Configuration Parameters
3054 Engine Cooling System - Inspect
TK1051 Track Feller Buncher Ether Starting Aid Cylinder - Replace
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055} Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
2001/05/21 The Rear Axle Housing Is Now Equipped with Extra Lugs and Extra Spacers for Custom Products {3260}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Solenoid Valves
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Sensors
2001/04/23 A New Flash File Is Used on the Electronic Control Module of Wheel Harvesters {7490, 7620}
735 Articulated Truck Power Train Differential - Test
TH103 Telehandler Hydraulic System Frame Leveling System
740 and 740 EJECTOR Articulated Trucks Power Train Torque Converter
TH103 Telehandler Hydraulic System Auxiliary System
735 Articulated Truck Power Train Torque Converter
533 and 543 Wheel Feller Bunchers Engine Stopping
740 and 740 EJECTOR Articulated Trucks Power Train Transmission Planetary
770 and 772 Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fuel System - Prime
769D Off-Highway Truck and 771D Quarry Truck Air Dryer Desiccant - Replace
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve - Test