CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Caterpillar


Steering Hydraulic System

Usage:

CS-663E AEF



图 1g00774747

右转时的转向系统

(1) 液压油箱

(2) 齿轮泵

(3) 安全阀

(4) 风扇马达

(5) 到充油滤清器的液压油管

(6) 计量泵

(7) 转向油缸

(8) 摆线泵

(9) 旋转套筒

(10) 到充油滤清器的液压油管

(11) 优先阀

右转运行

为了实现右转,方向盘的转动使旋转套筒 (9) 移动。 从而启动旋转套筒的底部。 来自计量泵的先导信号油使充油压力升至22100 kPa (3205 psi) 的最大压力。 优先阀顶部的油压和弹簧力使阀向下移动。 从而使油从泵流向计量泵 (6) 。 优先油流流过旋转套筒和摆线泵 (8) 。 随后,油流流向左侧油缸的缸盖端和右侧油缸的连杆端。 转向油缸使机器以机器前端为轴转动,从而使压土机右转。

如果先导油达到 22100 kPa (3205 psi),安全阀 (3) 将打开,因此过量先导压力将卸入泵进口。 此时,优先阀 (11) 底部油压的作用力克服优先阀顶部施加的作用力。 这使优先阀 (11) 向上移动,从而降低到转向系统的油流量。

从转向油缸 (7) 另一端压出的油流回旋转套筒 (9) 。 油继续流向充油滤清器,以用于充油回路。

不转向运行

当压土机不转向时,定心弹簧使旋转套筒 (8) 返回中位。 齿轮泵 (2) 将油送往旋转套筒,并且油不能流向转向油缸 (7) 。 来自计量泵 (6) 的先导信号油基本处于充油压力下。 优先阀 (11) 底部油压的作用力克服优先阀顶部施加的作用力。 这使得优先阀向上移动,并且流向旋转套筒的多数油被阻断。 此时,油通过端口流向充油回路和其他机具回路。

Caterpillar Information System:

725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake) - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil - Change
2001/01/29 Improvements have been made to the Steering Column {4338}
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
216 and 226 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Heads
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Disassemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Relief Valve (Main) - Test and Adjust
2001/01/29 The Ladder Support for the Pipelayer Is Improved {7254}
2001/02/12 A New Fuel Ratio Control (FRC) is Available for Stanadyne Fuel Injection Pumps on some 3054 and 3056 Turbocharged Engines {1278}
797 Off-Highway Truck Filter and Screen Locations
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Final Drive Planetary (Drum Propel)
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Machine Preparation for Troubleshooting
3500 Generator Set Engines Engine Oil Pressure - Test
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Filter - Replace
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Visual Inspection
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Machine Preparation for Troubleshooting
2001/01/29 Rework Process for Exhaust Manifolds {1059}
2001/01/29 A New Guard Is Used on the Wiring Harness of Wheel Harvesters {7150}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Level - Check
216, 226 and 228 Skid Steer Loaders Engine Supplement Gear Motor (Fan) - Remove
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Case Drain Flow for Piston Motor - Test and Adjust
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Assemble
725C2 and 730C2 Articulated Truck Machine System Pump Control Valve (Brake) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.