The Ladder Support for the Pipelayer Is Improved {7254}
- Pipelayer:
- 561M (S/N: 1KW1-UP)
Description of Change:
Show/hide table
Illustration 1 | g00769107 |
The bracket for the ladder support can be improved in order to prevent cracking. Weld a gusset to the existing support plate in order to stiffen the assembly.
Adaptable To: The improvement is adaptable to 561M (S/N: 1KW1-298) Pipelayers. The ladder is relocated and the bracket is not necessary for (S/N: 1KW299-UP) Pipelayers.
Use the following procedure to prevent cracking.
Procedure for Fabrication
- Fabricate one gusset. Refer to Illustration 2 for the dimensions.
Show/hide table
Illustration 2 | g00768545 |
Gusset dimensions (A) 6 mm (0.24 inch) (B) 108 mm (4.25 inch) (C) 50.4 mm (1.98 inch) (D) 30 mm (1.18 inch) (E) 30 mm (1.18 inch) diameter (F) 150 mm (5.91 inch) (G) 30 mm (1.18 inch) |
- Weld a 6 mm (0.24 inch) fillet weld at location (A) in order to join gusset (1) to bracket (2). Refer to Illustration 3.
Show/hide table
Illustration 3 | g00768546 |
(1) Fabricated gusset (2) 145-7304 Plate |
- Assemble the new bracket assembly to the machine.
Caterpillar Information System:
2001/02/12 A New Fuel Ratio Control (FRC) is Available for Stanadyne Fuel Injection Pumps on some 3054 and 3056 Turbocharged Engines {1278}
797 Off-Highway Truck Filter and Screen Locations
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Final Drive Planetary (Drum Propel)
330C Excavator Engine Crankcase Breather - Clean
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Assemble
Installation Guide for the Machine Security System on Skid Steer Loaders{7631} Installation Guide for the Machine Security System on Skid Steer Loaders{7631}
C-9 Industrial Engine Cylinder Head Grounding Stud - Inspect/Clean/Tighten
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Piston Motor (Drum Propel)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Pilot Valve (Stabilizer) - Disassemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Relief Valve (Charge) - Test and Adjust
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Pilot Valve (Joystick)
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Piston Pump (Drum Propel)
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Relief Valve (Main) - Test and Adjust
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Disassemble
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Heads
216 and 226 Skid Steer Loaders Machine Systems Piston Motor (Hydrostatic)
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
2001/01/29 Improvements have been made to the Steering Column {4338}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil - Change
725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake) - Install
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Steering Hydraulic System
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Machine Preparation for Troubleshooting
3500 Generator Set Engines Engine Oil Pressure - Test
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Filter - Replace