826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Caterpillar


Transmission Oil Level - Check

Usage:

824G II AWW


Illustration 1g00768792

The sight gauge for the transmission oil is located on the left side of the machine.

When the engine is off and the transmission oil is cold, maintain the transmission oil level to "FULL" mark (1). When the engine is running at low idle and the transmission oil is warm, maintain the transmission oil level between "FULL" mark (1) and "LOW" mark (2). Add oil, if necessary.



Illustration 2g00776156

Landfill Compactors are equipped with additional guards. Move the lever (4) and raise the access door (3) into the raised position, as shown. This will allow you to view the sight glass.

Caterpillar Information System:

2001/01/29 A New Guard Is Used on the Wiring Harness of Wheel Harvesters {7150}
2001/01/29 Rework Process for Exhaust Manifolds {1059}
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Machine Preparation for Troubleshooting
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Visual Inspection
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Filter - Replace
3500 Generator Set Engines Engine Oil Pressure - Test
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Machine Preparation for Troubleshooting
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Steering Hydraulic System
725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake) - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil - Change
2001/01/29 Improvements have been made to the Steering Column {4338}
236, 246, 252 and 262 Skid Steer Loaders Machine Systems Piston Pump (Hydrostatic)
216, 226 and 228 Skid Steer Loaders Engine Supplement Gear Motor (Fan) - Remove
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Case Drain Flow for Piston Motor - Test and Adjust
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Steering Metering Pump - Assemble
725C2 and 730C2 Articulated Truck Machine System Pump Control Valve (Brake) - Remove and Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Window Washer Reservoir - Fill
2001/02/19 A New Hose is used on the Pitot Tube in the Ventilation System on the Paver {6654}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Pump Drive - Remove
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory System Vibratory Frequency - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Hoist Control Valve - Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Relief Valve (Charge) - Test and Adjust
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Reference Material
980H Wheel Loader Belt - Inspect/Adjust/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.