2001/01/08 Caterpillar


Improved Transmission Direction Switch Now Used {7332}

Usage:

525 1DN
Landfill Compactor:
826G (S/N: 7LN1-UP)
Soil Compactor:
825G (S/N: 6RN1-UP)
Wheel Loader:
950G (S/N: 2JS1-UP; 4BS1-UP; 6NS1-UP)
962G (S/N: 3BS1-UP; 5AS1-UP; 5RS1-UP)
966G (S/N: 3ZS1-UP; 9RS1-UP; AAH1-UP)
972G (S/N: 1EW1-UP; 7LS1-UP; AAW1-UP)
980G (S/N: 2KR1-UP; 2SR1-UP; 9CM1-UP)
Wheel Skidder:
515 (S/N: 4LR1-UP)
525 (S/N: 1DN1-UP)
535B (S/N: AAE1-UP)
545 (S/N: 2FZ1-UP)
525B (S/N: 3KZ1-UP)
Wheel Tractor:
824G (S/N: 4SN1-UP)
Service Magazine SEPD0557, 08 January 2001, "Improved Transmission Direction Switch Now Used". Disregard this article. See the article that follows.

Description of Change: The operation of the forward/neutral/reverse transmission switch has been improved. This improvement has been made in order to address logged diagnostic codes (CID623) which can occur when the transmission switch is held between detent positions.

Adaptable To: The replacements for the 152-5707 Rocker Switch and the 145-8673 Rocker Switch are listed in Table 1.

Table 1
Replacement Switch Part Numbers    
Steering Wheel     Old Switch     New Switch    
151-7007 (1)     152-5707     177-7582    
123-7406 (2)     145-8673     177-2373    
179-0599 (3)     N/A     177-7582    
( 1 ) Refer to Illustration 1.
( 2 ) Refer to Illustration 2.
( 3 ) Refer to Illustration 3.



Illustration 1g01028085

151-7007 Steering Wheel Gp




Illustration 2g01027827

123-7406 Steering Wheel Gp




Illustration 3g01028096

179-0599 Steering Wheel Gp

Caterpillar Information System:

HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Remove
RM-250C Reclaimer Mixer Machine Systems Air Compressor Governor - Test and Adjust
RM-250C Reclaimer Mixer Machine Systems Rotor Drive Chain Tension - Check and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Assemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Disassemble
RM-250C Reclaimer Mixer Machine Systems Rotor Clutch Pressure (Power Take-Off Clutch) - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Remove
RM-250C Reclaimer Mixer Machine Systems Wheel Alignment - Check and Adjust
RM-250C Reclaimer Mixer Machine Systems Machine System Troubleshooting
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Remove
2001/01/29 Correction to the Special Instruction for the Procedure to Retrofit the Scarifier {6162, 6165}
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Transmission Hydraulic Control) - Remove and Install
2001/04/02 New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
C-15 and C-16 Industrial Engines Alternator and Regulator
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System General Information (Hydraulic System)
AP-1000B and BG-260C Asphalt Pavers Indicators
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Disassemble
RM-250C Reclaimer Mixer Machine Systems Shifter (Rotor Axle) - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train Bypass Valve - Remove and Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Assemble
725 and 730 Articulated Trucks Power Train Differential - Test
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.