Feed Roller - Remove
Removal Procedure
Start By:
- Place the harvester head in the vertical position. Secure the frame of the harvester head to the yoke with a suitable chain. Release the oil pressure in the harvester head. See Disassembly and Assembly, "Preparation for Disassembly" for more information.
- Attach a hoist and a suitable lifting sling to feed roller (1) .
Show/hide table
 | |
| Illustration 1 | g00765701 |
- Remove nuts (2) .
- Use the hoist to carefully remove feed roller (1). The weight of the feed roller is 82 kg (180 lb).
Caterpillar Information System:
RM-250C Reclaimer Mixer Machine Systems Wheel Alignment - Check and Adjust
RM-250C Reclaimer Mixer Machine Systems Machine System Troubleshooting
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Remove
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System System Schematic
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
725 and 730 Articulated Trucks Power Train Interaxle Differential - Test
2001/11/05 A New Optional Two-Piece Service Replacement Piston Is Available {1214}
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Torque Converter Outlet) - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System General Information
3054E and 3056E Industrial Engines After Stopping Engine
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Injection Actuation Pressure Control Valve Circuit - Test
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Install
RM-250C Reclaimer Mixer Machine Systems Rotor Clutch Pressure (Power Take-Off Clutch) - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Assemble
RM-250C Reclaimer Mixer Machine Systems Rotor Drive Chain Tension - Check and Adjust
RM-250C Reclaimer Mixer Machine Systems Air Compressor Governor - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Remove
2001/01/08 Improved Transmission Direction Switch Now Used {7332}
2001/01/29 Correction to the Special Instruction for the Procedure to Retrofit the Scarifier {6162, 6165}
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Transmission Hydraulic Control) - Remove and Install
2001/04/02 New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
C-15 and C-16 Industrial Engines Alternator and Regulator