Rotor Drive Chain Tension - Check and Adjust
Show/hide table
 | |
| Illustration 1 | g00765758 |
Tightener Adjustment (1) Chain tension adjuster (2) Chain | |
To adjust the chain tension adjuster (1), use limited force on a pry bar that is applied to chain (2) between the sprockets on the opposite side of the adjuster. Only use enough force to deflect the chain 25.4 mm (1.0 inch).
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Assemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Disassemble
RM-250C Reclaimer Mixer Machine Systems Rotor Clutch Pressure (Power Take-Off Clutch) - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller - Remove
RM-250C Reclaimer Mixer Machine Systems Wheel Alignment - Check and Adjust
RM-250C Reclaimer Mixer Machine Systems Machine System Troubleshooting
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Remove
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System System Schematic
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Torque Converter Inlet) - Remove and Install
725 and 730 Articulated Trucks Power Train Interaxle Differential - Test
RM-250C Reclaimer Mixer Machine Systems Air Compressor Governor - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Remove
2001/01/08 Improved Transmission Direction Switch Now Used {7332}
2001/01/29 Correction to the Special Instruction for the Procedure to Retrofit the Scarifier {6162, 6165}
725, 730 and 730 EJECTOR Articulated Trucks Power Train Relief Valve (Transmission Hydraulic Control) - Remove and Install
2001/04/02 New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
C-15 and C-16 Industrial Engines Alternator and Regulator
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System General Information (Hydraulic System)
AP-1000B and BG-260C Asphalt Pavers Indicators
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Disassemble
RM-250C Reclaimer Mixer Machine Systems Shifter (Rotor Axle) - Test
725, 730 and 730 EJECTOR Articulated Trucks Power Train Bypass Valve - Remove and Install