Pilot Valve (Loader) - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Install pilot valve (17) .
Show/hide table
 | |
| Illustration 1 | g00756710 |
- Install two nuts and washers (16) .
Show/hide table
 | |
| Illustration 2 | g00756698 |
- Install two nuts and washers (15) onto the other side of the bracket.
Show/hide table
 | |
| Illustration 3 | g00754605 |
- Secure four clips (13) in order to install the boot.
Show/hide table
 | |
| Illustration 4 | g00754593 |
- Connect wiring harness (12) .
Show/hide table
 | |
| Illustration 5 | g00754585 |
- Connect wiring harness (11) .
Show/hide table
 | |
| Illustration 6 | g00754583 |
- Connect six lines (10) .
Show/hide table
 | |
| Illustration 7 | g00754579 |
- Install parking brake assembly (9) and install three bolts (8) .
Show/hide table
 | |
| Illustration 8 | g00756723 |
- Install cable (6) into the parking brake assembly.
Show/hide table
 | |
| Illustration 9 | g00756726 |
- Spread clip (7). Install pin (5), and clip (4) .
- Install cover (2) and install screws (3) .
Show/hide table
 | |
| Illustration 10 | g00754564 |
Show/hide table
 | |
| Illustration 11 | g00754568 |
- Install floormat (1) .
End By: Check the hydraulic oil level. Refer to Operation and MaintenanceSEBU7398"Capacities" for the proper capacity.
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Remove
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 12
2001/02/05 Special Instructions, REHS0969, "Installation of Remote Mounting of the Air Conditioner Condenser" is Now Available {1805}
2000/12/25 Cold Weather Accessories for Skid Steer Loaders {1383, 1401, 7301, 7304, 7308, 7310}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 09
RM-250C Reclaimer Mixer Propel System Piston Motor (Transmission, Axle, and Final Drive)
2000/11/27 A New Directional Control Valve Improves the Response of the Proportional Steering on Remote Control {5412}
2001/02/05 Improved Lift Arm Bearings are Available {6107, 6118}
2001/03/12 The Hardware and Software for the Transmission have been Revised {3168, 7620}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 02
Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057} Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057}
2000/11/27 Revision to Specifications , "Relief Valve (Main)" and "Relief Valve (Line)" {5069, 5117}
988G Wheel Loader Power Train Differential Pinion Preload - Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0585 - FMI 02
988G Wheel Loader Power Train Differential Backlash and Bearings - Adjust
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Tire Segment - Replace - Removal
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Pilot Valve (Loader) - Disassemble
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
432D and 442D Backhoe Loaders Joystick Control (Loader)
2001/04/23 Certain Parts of the 153-8338 Air Control Valve Gp and of the 143-8994 Air Control Valve Gp are Now Available {4265, 4290}
432D and 442D Backhoe Loaders Multipurpose Controls
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0590 - FMI 09
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader) (Pilot Operated)