Improved Lift Arm Bearings are Available {6107, 6118}
- Load Haul Dump (LHD):
- R1300 (S/N: 6QW)
Description of Change: Improved lift arm bearings are now available. The improved lift arm bearings are case hardened which extends service life.
Adaptable To: The improved 196-0064 Sleeve Bearing is a direct replacement for the former 1V-6934 Sleeve Bearing. The 196-0064 Sleeve Bearing is effective with R1300 (S/N: 6QW925-UP). The 196-0064 Sleeve Bearing is adaptable to R1300 (S/N: 6QW1-924) by referring to Table 1.
Show/hide table
Qty     | New Part Number     | Description     | Former Part Number     |
2     | 196-0064     | Sleeve Bearing     | 1V-6934     |
Caterpillar Information System:
2001/03/12 The Hardware and Software for the Transmission have been Revised {3168, 7620}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 02
Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057} Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057}
2000/11/27 Revision to Specifications , "Relief Valve (Main)" and "Relief Valve (Line)" {5069, 5117}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Hydraulic System Pressure - Release
2000/11/27 Revision to Systems Operation, Testing and Adjusting , "Main Relief Valve" {5069}
2000/11/27 Revision to Systems Operation, Testing and Adjusting , "Relief Valve (Main) - Test and Adjust" {5069, 5069}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 06
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Hydraulic System Pressure - Release
2000/11/27 Revision to Systems Operation, Testing and Adjusting , "Tilt Cylinder Head End Line Relief Valve" {5117, 5117}
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Steering) - Test and Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 05
2000/11/27 A New Directional Control Valve Improves the Response of the Proportional Steering on Remote Control {5412}
RM-250C Reclaimer Mixer Propel System Piston Motor (Transmission, Axle, and Final Drive)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 09
2000/12/25 Cold Weather Accessories for Skid Steer Loaders {1383, 1401, 7301, 7304, 7308, 7310}
2001/02/05 Special Instructions, REHS0969, "Installation of Remote Mounting of the Air Conditioner Condenser" is Now Available {1805}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 12
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Pilot Valve (Loader) - Install
988G Wheel Loader Power Train Differential Pinion Preload - Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0585 - FMI 02
988G Wheel Loader Power Train Differential Backlash and Bearings - Adjust
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Tire Segment - Replace - Removal