 | |
| Illustration 1 | g00757037 |
Bank valve for the pilot operated loader (1) Outlet manifold, (2) Auxiliary control valve (If equipped), (3) Loader tilt control valve, (4) Loader lift control valve, (5) Priority valve and (6) Valve for the steering system and limiter for signal pressure | |
The bank valves are located on the right frame rail under the cab floor. This valve is also used to control optional implements that may be equipped with the machine.
 | |
| Illustration 2 | g00757039 |
Joystick for the loader (7) Joystick control for the loader. (8) Transmission neutralizer button. (9) Switches for the all wheel steer. (10) Auxiliary control. | |
The pilot lines connect the valve sections to the joystick for the loader. Joystick (7) controls the lift circuit, the lowering operation, and the float detent for the bucket. The loader control also controls the bucket dump and bucket tilt function. If the machine is equipped with the auxiliary circuit, auxiliary control (10) is connected to the auxiliary control valve.
The loader lever also contains transmission neutralizer button (8). When the button is pushed, the button disengages the transmission. Disengaging the transmission allows more power to be available to the hydraulic system.
The joystick for the loader also contains the switches (9) for the all wheel steer (if equipped).