Service Brake (Front Caliper) - Disassemble
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-0520 | 起子总成 | 1 |
| B | 1U-9003 | 拉拔器 | 1 |
开始:
- 拆下前钳式行车制动器。 请参阅拆解和组装, "行车制动器（前钳式）- 拆卸"。
- 松开前钳式行车制动器中固定两个销 (2) 的螺栓 (1)。
- 拆下两个销 (2)。 从前钳式行车制动器上拆下两个制动器衬垫组件 (3)。
Show/hide table
图 2 g00482695 - 拆下八个螺栓 (4) 和硬垫圈。 从前钳式行车制动器上拆下盖 (5)。
Show/hide table
图 3 g00482697 Show/hide table
图 4 g00482698 - 将前钳式行车制动器放置到水平表面上。 安装工具 (A) 和销 (2)。 撬起销 (2)。 从前钳式行车制动器上拆下螺塞 (6)、密封件 (7) 和活塞 (8)。
- 对其余两个螺塞和活塞重复该步骤。
Show/hide table
图 5 g00482699 - 从前钳式行车制动器上拆下三个罩 (9)。
Show/hide table
图 6 g00482741 - 用刀在其余三个活塞 (11) 的底座周围切三个罩 (10)。
Show/hide table
图 7 g00482742 - 在活塞 (11) 上安装工具 (B)。 放置撬杆和套管以便在工具 (B) 上撬动。 将活塞 (11) 从前钳式行车制动器撬出。
- 对于其余两个活塞，重复本步骤。
Show/hide table
图 8 g00482743 - 从前钳式行车制动器上拆下六个密封件 (12) 和六个环 (13)。
Show/hide table
| |
| 图 1 | g00482694 |
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
3034 Engine for Caterpillar Built Machines Camshaft - Remove
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Leveling Blade
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643} Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643}
2000/05/08 Correction to Guideline for Reusable Parts and Salvage Operations , "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" {3260, 4050}
2000/05/15 The Flash File For The Challenger 85D Has Been Updated {7620}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Work Tool Positioner
120H and 135H Motor Graders Circle Drive Oil Level - Check
2000/04/17 Correction to Disassembly and Assembly Module For The Disassembly of The Transmission {3030}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Assemble
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission and Transfer Gears - Separate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
24H Motor Grader Plate Locations and Film Locations
2000/04/24 Rework for Certain Rear Lamp Housing Groups {1429}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Assemble
3034 Engine for Caterpillar Built Machines Camshaft - Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Blade Valve and Mounting
3114, 3116, and 3126 Engines Fuel System - Prime
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Front) - Remove and Install