Leveling Blade
Show/hide table
 | |
| Illustration 1 | g00700923 |
(1) Torque for the bolt ... 400 ± 50 N·m (295 ± 35 lb ft)
(2) Torque for the bolt ... 400 ± 50 N·m (295 ± 35 lb ft)
(3) Apply 7X-7699 Lubricating Grease to the bore of the yoke bushing before inserting the pin.
(4) Torque for the bolt ... 400 ± 50 N·m (295 ± 35 lb ft)
Caterpillar Information System:
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643} Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643}
2000/05/08 Correction to Guideline for Reusable Parts and Salvage Operations , "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" {3260, 4050}
2000/05/15 The Flash File For The Challenger 85D Has Been Updated {7620}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Work Tool Positioner
120H and 135H Motor Graders Circle Drive Oil Level - Check
2000/04/17 Correction to Disassembly and Assembly Module For The Disassembly of The Transmission {3030}
2000/05/29 Use 178-3832 Tank Valve to Check Pressure Regulator Settings {5505, 5506}
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Diagnostic Enable Switch Circuit - Test
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>115-5101</B> Generator through <B>121-6860</B> Generator
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0359 - FMI 06
3114, 3116, and 3126 Engines Fuel Ratio Control - Adjust
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
3034 Engine for Caterpillar Built Machines Camshaft - Remove
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Assemble
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission and Transfer Gears - Separate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
24H Motor Grader Plate Locations and Film Locations
2000/04/24 Rework for Certain Rear Lamp Housing Groups {1429}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Disassemble