Use 178-3832 Tank Valve to Check Pressure Regulator Settings {5505, 5506}
- Paving Compactor:
- PS-150B (PIN: 3XR1-UP)
- PS-200B (PIN: 5JR1-UP)
- PS-360B (PIN: 9LS1-UP)
Features/Benefits
Check high and low pressure regulator settings of air-on-the-run systems by using the Tank Valve. The Tank Valve is used with 3B-7764 Reducing Bushing. Set the high pressure and the low pressure after the pressure regulator switch has been replaced. The valve is easy to connect to the air on the run tank. The valve is equipped with a standard valve core and a sealing cap.
Thread ... 1/4 NPT
Maximum pressure rating ... 1378 kPa (200 psi)
Overall length ... 38 mm (1.50 inch)
Material ... Brass
Show/hide table
 | |
| Illustration 1 | g00700646 |
178-3832 Tank Valve | |
Reference
See Service Manual, KENR2721, "Supplement for PS-150B,PS-200B, PS360B Pneumatic Compacts Air-on-the-Run System".Caterpillar Information System:
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Diagnostic Enable Switch Circuit - Test
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>115-5101</B> Generator through <B>121-6860</B> Generator
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0359 - FMI 06
3114, 3116, and 3126 Engines Fuel Ratio Control - Adjust
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Motor - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Steering Motor - Disassemble
24H Motor Grader Power Train Torque Converter Lockup Clutch Pressure - Test
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0359 - FMI 03
D350E Series II and D400E Series II Articulated Trucks Differential Lock Control
2000/08/14 The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
D350E Series II and D400E Series II Articulated Trucks Engine Compression Brake Control
120H Motor Grader Centershift Lock Bar - Clean/Lubricate
2000/04/17 Correction to Disassembly and Assembly Module For The Disassembly of The Transmission {3030}
120H and 135H Motor Graders Circle Drive Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Work Tool Positioner
2000/05/15 The Flash File For The Challenger 85D Has Been Updated {7620}
2000/05/08 Correction to Guideline for Reusable Parts and Salvage Operations , "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" {3260, 4050}
Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643} Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643}
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Leveling Blade
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
3034 Engine for Caterpillar Built Machines Camshaft - Remove
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install