CB-214D, CB-224D and CB-225D Vibratory Compactors Caterpillar

For the basic specifications of the machine, refer to the Operation and Maintenance Manual, "Specifications".

Lifting Point - In order to lift the machine, attach the lifting devices to the lifting points.

Tie Down Point - In order to tie down the machine, attach the tie-downs to the tie down points.

Use properly rated cables and properly rated slings in order to lift the machine.

Position the crane or the lifting device in order to lift the machine in a level position.

The width of the spreader bar must be sufficient to prevent the lifting cables or the lifting straps from contacting the machine.

Illustration 1	g00639154

1. Attach lifting cables to the lifting eyes. The lifting eyes are identified on the machine by symbols.

Show/hide table



Illustration 2	g00639173

Show/hide table

NOTICE
In all cases, before tying down the machine, place wooden blocks under the front and rear frames. This will reduce the stress on the rubber isolation blocks.

2. Place blocks under the front and the rear frames.

3. Place blocks under the front and rear drums. Block tires.

4. In order to secure the machine, use tie-downs during transportation.

   Contact your Caterpillar dealer for shipping instructions.