Fan Guard - Remove and Install
Removal Procedure
Start By:
- Remove the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove and Install" for the machine that is being serviced.
- Remove the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install" for the machine that is being serviced.
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Remove bolt (1), two washers, and the nut.
Show/hide table
Illustration 1 | g00639105 |
- Remove bolt (2) and the washer.
- Remove two bolts (3) and the two washers.
Show/hide table
Illustration 2 | g00639106 |
Show/hide table
Illustration 3 | g00639107 |
- Remove bolt (4) and the washer.
- Remove bolt (6) and the washer. Remove fan guard assembly (5) .
- Remove bolt (7), the two washers, and the nut.
Show/hide table
Illustration 4 | g00639108 |
- Remove bolt (8) and the washer under the welded nut.
- Remove two bolts (9) and the washers. Remove bolt (10) and the washer. Remove top left fan guard assembly (11) .
Show/hide table
Illustration 5 | g00639109 |
- Remove bolts (12) and the washers. Remove the right cover (13) .
Show/hide table
Illustration 6 | g00639110 |
- Remove bolts (14), bolts (16) and the washers. Remove bottom fan guard assembly (15) .
Show/hide table
Illustration 7 | g00639113 |
Installation Procedure
- Install bottom fan guard assembly (15) to the original location. Install bolts (14), bolts (16), and the washers.
Show/hide table
Illustration 8 | g00639113 |
- Install the right cover (13). Install bolts (12) and the washers.
Show/hide table
Illustration 9 | g00639110 |
- Install the top left fan guard assembly (11) to the original location. Install bolt (10) and the washer. Install two bolts (9) and the washers.
Show/hide table
Illustration 10 | g00639109 |
- Install bolt (8) and the washer. Install bolt (7), the two washers, and the nut.
Show/hide table
Illustration 11 | g00639108 |
- Install fan guard assembly (5) to the original location. Install bolt (6) and the washer.
Show/hide table
Illustration 12 | g00639107 |
Show/hide table
Illustration 13 | g00639106 |
- Install bolt (4) and the washer.
- Install two bolts (3) and the two washers.
- Install bolt (2) and the washer.
Show/hide table
Illustration 14 | g00639105 |
- Install bolt (1), two washers, and the nut.
End By:
- Install the engine side guards. Refer to Disassembly and Assembly, "Engine side guards- Remove and Install" for the machine that is being service.
- Install the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove and Install" for the machine that is being serviced.
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Upper Roller - Remove and Install
CB-214D, CB-224D and CB-225D Vibratory Compactors Stopping the Machine
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Engine Oil Level Switch
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Electronic Display Module
C-10 and C-12 Industrial Engines Electrical Ground Stud
12H, 140H and 160H Motor Graders Power Train Transmission Oil Filter Base - Remove and Install
Retrofitting Telescopic Material Handlers (RT Series) for the use of pilot control valves that are currently used in TH62 through TH103 machines{5059, 6400} Retrofitting Telescopic Material Handlers (RT Series) for the use of pilot control valves that are currently used in TH62 through TH103 machines{5059, 6400}
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Engine Speed/Timing Sensor - Calibrate
572R Pipelayer Engine Supplement Hydraulic Oil Cooler - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Accumulator (Suspension)
D350E Series II and D400E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve
980G Wheel Loader Power Train Oil Filter (Power Train)
980G Wheel Loader Power Train Output Transfer Gears
CB-214D, CB-224D and CB-225D Vibratory Compactors Lifting and Tying Down the Machine
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Preparation for Disassembly
539 Knuckleboom Loader Hydraulic System Swing Motor Case Drain Oil - Measure
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Throttle Position Sensor
980G Wheel Loader Power Train Differential
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Remove
776D and 777D Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Install
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
12H, 140H and 160H Motor Graders Power Train Transmission Oil Cooler - Remove