D350E Series II and D400E Series II Articulated Trucks Caterpillar


Hoist Cylinder Bearings - Lubricate

Usage:

D350E II 2XW



Illustration 1g00637415

  1. Wipe all fittings (1) before you lubricate the hoist cylinder bearings.

  1. Lubricate the hoist cylinder bearings via four fittings (1). There are two fittings (1) on each side of the machine.

    If regular lubrication is performed at the recommended interval, only one or two shots of grease will be required at each fitting.

Caterpillar Information System:

12H, 140H and 160H Motor Graders Engine Supplement Battery - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Camshaft - Install
3176C and 3196 Industrial Engines Rear Power Take-Off (RPTO) - Install
3176C and 3196 Industrial Engines Rear Power Take-Off (RPTO) - Remove
12H, 140H and 160H Motor Graders Machine Systems Main Frames - Connect
3056 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
527 Track-Type Skidder Machine Supplements Grapple Boom (Swing Boom) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F006 Slip Limit Override Potentiometer - Failed Low
539 Knuckleboom Loader Hydraulic System Swing Motor
527 Track-Type Skidder Machine Supplements Grapple Boom (Swing Boom) - Remove
3056 Engine for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Fuel Tank Water and Sediment - Drain
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Bearings - Install
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Valve Lash and Injector Fuel Timing - Check/Adjust
3176C and 3196 Industrial Engines Camshaft Bearings - Remove
980G Wheel Loader Power Train Torque Converter
527 Track-Type Skidder Machine Supplements Grapple Jib Boom Cylinder - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Preparation for Troubleshooting
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Ground Level Shutdown Switch
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F007 Slip Limit Override Potentiometer - Failed High
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Three-Point Hitch-Lubricate
776D, 777D and 777D HAA Off-Highway Truck/Tractors Steering System Shuttle Valve (Secondary Steering)
D350E Series II and D400E Series II Articulated Trucks Fuses - Replace
527 Track-Type Skidder Machine Supplements Grapple Boom Cylinder - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.