Fuses - Replace
Show/hide table
NOTICE |
---|
Replace fuses with the same type and size only. Otherwise, electrical damage can result. If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer. |
Show/hide table
Illustration 1 | g00637511 |
The fuse panel is located on the right side of the seat for the operator.
Note: The fuses protect the electrical system from damage, which can be caused by an electrical overload.
Note: Your machine may not utilize all of the fuses that are listed here.
The fuses protect the electrical system from damage that is caused by overloaded circuits. If the element inside the fuse separates, replace the fuse. Check the circuit if the element is separated in the new fuse. Repair the circuit, if necessary.
Show/hide table
Caterpillar Monitoring System (1) - 10 amp |
Show/hide table
Engine Starting Aid (2) - 10 amp |
Show/hide table
Transmission Control (3) - 10 amp |
Show/hide table
Front Wiper/Washer (4) - 10 amp |
Show/hide table
Cigar Lighter (5) - 10 amp |
Show/hide table
Rear Wiper/Washer (6) - 10 amp |
Show/hide table
Rear Lights (7) - 10 amp |
Show/hide table
Work Light (7) - 10 amp |
Show/hide table
Horn and Electrical Outlet (8) - 10 amp |
Show/hide table
Stop Lights (9) - 10 amp |
Show/hide table
Caterpillar Monitoring System (Switch) (10) - 10 amp |
Show/hide table
Radio and Dome Light (11) - 10 amp |
Show/hide table
Turn Signals and Dash Panel Lights (12) - 10 amp |
Show/hide table
Backup Alarm (13) - 10 amp |
Show/hide table
Auxiliary Power Outlet (14) - 10 amp |
Show/hide table
Seat (15) - 15 amp |
Show/hide table
Heated Mirror and Heated Seats (16) - 10 amp |
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Steering System Shuttle Valve (Secondary Steering)
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Three-Point Hitch-Lubricate
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Systems F007 Slip Limit Override Potentiometer - Failed High
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Ground Level Shutdown Switch
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Preparation for Troubleshooting
527 Track-Type Skidder Machine Supplements Grapple Jib Boom Cylinder - Remove and Install
980G Wheel Loader Power Train Torque Converter
3176C and 3196 Industrial Engines Camshaft Bearings - Remove
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Valve Lash and Injector Fuel Timing - Check/Adjust
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Bearings - Install
D350E Series II and D400E Series II Articulated Trucks Hoist Cylinder Bearings - Lubricate
12H, 140H and 160H Motor Graders Engine Supplement Battery - Remove and Install
527 Track-Type Skidder Machine Supplements Grapple Boom Cylinder - Remove and Install
3056 Engine for Caterpillar Built Machines Water Outlet Manifold - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Visual Inspection
Assembly Procedure for the Flat Floor Truck Body{7258, 7960} Assembly Procedure for the Flat Floor Truck Body{7258, 7960}
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 590 FMI 9 Engine Electronic Control Module Abnormal Update - Test
12H, 140H and 160H Motor Graders Engine Supplement Engine Enclosure (Hood) - Remove
797 and 797B Off-Highway Truck/Tractors Braking System Service Tools
12H, 140H and 160H Motor Graders Engine Supplement Engine Enclosure (Hood) - Install
527 Track-Type Skidder Machine Supplements Grapple Control Valve (Fixed Boom) - Remove
12H, 140H and 160H Motor Graders Engine Supplement Air Cleaner - Remove and Install
12H, 140H and 160H Motor Graders Engine Supplement Turbocharger - Remove and Install
12H, 140H and 160H Motor Graders Engine Supplement Muffler - Remove and Install