Hook Cable Guide Sheave - Remove
Removal Procedure
- Lower the boom until the tension of the hook cable against the guide sheave is removed.
- Remove bolts (1) and the washers.
Show/hide table
 | |
| Illustration 1 | g00546979 |
Photos were taken prior to the installation of the hook load line and the boom line. | |
- Remove retainer (2) .
- Remove pin (4) .
Show/hide table
 | |
| Illustration 2 | g00547025 |
- Remove sheave assembly (3) .
- Remove locknut (7) and bolt (5) .
Show/hide table
 | |
| Illustration 3 | g00547167 |
- Remove sheave (6) .
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Flywheel - Remove
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hoist Cylinder - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Piston Pump (Steering) - Remove
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hydraulic Filter (Parking Brake Release) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Metering Pump (HMU)
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Muffler - Remove
24H Motor Grader Hydraulic and Steering System Hydraulic Tank and Filter
Field Installation of 162-8154 Fork Tine {6705} Field Installation of 162-8154 Fork Tine {6705}
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Caterpillar Monitoring System Calibration Mode
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
583R Pipelayer Machine Systems Hydraulic Tank and Filter - Assemble
3054 Engine for Caterpillar Built Machines Flywheel - Install
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Axle (Front)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Piston Pump (Steering) - Install
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Hoist Cylinder - Install
583R Pipelayer Machine Systems Boom Kickout Mechanism - Remove
3054 Engine for Caterpillar Built Machines Front Cover - Install
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
583R Pipelayer Machine Systems Boom Kickout Mechanism - Install
834G Wheel Dozer and 836G Landfill Compactor Electrohydraulic System Relief Valve (Main)
3406E Truck Engine Housing (Front)
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Strainer