24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Caterpillar


Engine Speed Sensor - Adjust

Usage:

24H 7KK



Illustration 1g00289497

Speed Sensor

(1) Speed sensor. (2) Locknut. (A) Air gap.

  1. Remove the speed sensor. Align a gear tooth directly in the center of the threaded sensor opening.

  1. Screw the sensor into the hole until the end of the sensor contacts the gear tooth. Use only hand pressure when you are installing the sensor.

  1. Unscrew the sensor (two-thirds of a turn). Two-thirds of a turn is 240°. This sets the air gap (A) to 0.89 mm (0.035 inch).

  1. Tighten the locknut (2) to 13 ± 1 N·m (115 ± 9 lb in).

Note: Do not allow the sensor to turn as the locknut is tightened.

Caterpillar Information System:

3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Glossary of Electrical Terms
3176C and 3196 Engines for Caterpillar Built Machines Air Conditioner Support Bracket - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Primary Steering Backup) - Test and Adjust
793C and 793C XQ Off-Highway Truck Air System and Brakes Relay Valve (Brake Air)
CB-534C and CB-634C Vibratory Compactors Propel System Visual Inspection
554 Forwarder and 574 Forwarder Final Drive Oil - Change
784C and 785C Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Brake) - Assemble
793C and 793C XQ Off-Highway Truck Air System and Brakes Towing
CB-534C and CB-634C Vibratory Compactors Propel System Machine Preparation for Troubleshooting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Accumulator (Suspension) - Remove and Install
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control Clutch Pressure - Test
793B Off-Highway Truck Air System and Brakes Air Control Valve (Retarder)
773D Off-Highway Truck and 775D Quarry Truck Power Train Transmission Hydraulic Control Clutch Pressure - Test
793C and 793C XQ Off-Highway Truck Air System and Brakes Air Flow Schematic
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Implement, Steering and Brake Hydraulic Systems General Testing and Adjusting Information
561M Pipelayer Transmission Magnetic Screen - Clean
554 Forwarder and 574 Forwarder Drive Shaft Universal Joints (Front and Rear) - Lubricate
784C and 785C Off-Highway Truck Power Train Transmission Planetary - Disassemble
D8R Track-Type Tractor Engine Supplement Belt Tightener - Disassemble
D8R Track-Type Tractor Engine Supplement Belt Tightener - Assemble
980G Wheel Loader Power Train Differential and Bevel Gear - Assemble
773D Off-Highway Truck and 775D Quarry Truck Cooling System Coolant (ELC) - Change
793C and 793C XQ Off-Highway Trucks Power Train Electronic Control Module (Power Train)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.