Access and Exit Procedures
- Access to the operator's compartment is provided at the front of the machine.
- When you mount the machine, use the suspended step, the step on the bumper (1), ladder (2), and the appropriate handholds. Also, face the machine and use both hands when you mount the machine.
Show/hide table
Illustration 2 g00037860 - Always maintain a three-point contact with the steps and the handholds.
Note: Three-point contact can be two feet and one hand. Three-point contact can also be one foot and two hands.
- When you enter the machine cab from the left side, be aware of the canopy side guard. If you enter the machine cab from the right side, avoid hitting your head on the canopy or the door opening.
Show/hide table
Illustration 1 | g00628779 |
Show/hide table
Illustration 3 | g00628780 |
- Turn engine start switch key (3) to the OFF position and engage the parking brake.
- When you leave the machine cab through the left door, be aware of the canopy side guard.
Show/hide table
Illustration 4 g00628781 - When you leave the machine cab through the right door, carefully step around transmission control console (4). When you step onto the hood, avoid hitting your head on the door opening or the canopy.
- When you dismount the machine, use the steps and the handholds. Also, face the machine and use both hands when you dismount the machine.
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Cylinder Block
583R Pipelayer Power Train Track Roller - Assemble
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Control Valve (Hoist)
784C and 785C Off-Highway Trucks Machine Systems Metering Pump (Steering) - Install
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air Control Valve (Retarder)
797 Off-Highway Truck Power Train Transmission Planetary - Assemble
583R Pipelayer Engine Supplement Engine and Torque Divider - Install
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Front)
583R Pipelayer Power Train Track Roller - Disassemble
D7R Track-Type Tractor Power Train Sprocket Segment - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Parking Brake - Assemble
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Inverter Valve (Secondary Brake)
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Hydraulic Tank (Torque Converter, Hoist, Brake and Transmission)
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Hydraulic Tank (Torque Converter, Pulled Unit, Brake, and Transmission)
784C and 785C Off-Highway Trucks Machine Systems Steering Accumulator - Install
3406E and 3456 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
583R Pipelayer Engine Supplement Fuel Filter and Base - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Gear Pump (Implement, Steering and Brakes) - Disassemble
583R Pipelayer Engine Supplement Fuel Ratio Control - Remove
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Control Valve (Pulled Unit)
583R Pipelayer Engine Supplement Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines Flywheel - Install
583R Pipelayer Engine Supplement Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove