Pressure Switch (Steering)
Show/hide table
 | |
| Illustration 1 | g00244770 |
Maximum actuation pressure at -40° to +121°C (-40.0° to +250.0°F) ... 1206 kPa (175 psi)
Deactuation pressure at -40° to +121°C (-40.0° to +250.0°F) ... 700 ± 103 kPa (100 ± 15 psi)
Contact positions (1) and (2) are normally open below deactuation pressure. ... 700 ± 103 kPa (100 ± 15 psi)
Contact positions (1) and (3) are normally closed below deactuation pressure. ... 700 ± 103 kPa (100 ± 15 psi)
Final installation torque for pressure switch ... 100 ± 15 N·m (75 ± 11 lb ft)
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove
784C and 785C Off-Highway Trucks Machine Systems Steering Tank and Filter - Remove
550, 570 and 580 Wheel Harvesters Swing Brake Manual Release
793C Off-Highway Truck Machine Systems Hydraulic Tank - Assemble
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic Tank (Torque Converter, Pulled Unit, Brake, and Transmission)
550, 570 and 580 Wheel Harvesters Parking Brake Manual Release
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic Tank (Torque Converter, Hoist, Brake and Transmission)
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C-10 and C-12 Industrial Engines Fuel Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines Inlet Air Temperature Sensor
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control - Assemble
793C Off-Highway Truck Machine Systems Gear Pump (Hoist) - Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
3406C Engines for Caterpillar Built Machines Fuel Injection Lines
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Bank Valve - Install
24H Motor Grader Hydraulic and Steering System Temperature Switch (Hydraulic Oil)
3406E On-Highway Engine Electric Starting Motor - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Switches
793C Off-Highway Truck Machine Systems Gear Pump (Hoist) - Disassemble
24H Motor Grader Hydraulic and Steering System Position Sensor (Articulation)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Hoist)
583R Pipelayer Power Train Duo-Cone Conventional Seals - Install
583R Pipelayer Engine Supplement Alternator - Remove and Install