Heater Control Valve - Install
Installation Procedure
- Install sleeves (8) and (13) on the valve.
Show/hide table
Illustration 1 | g00459142 |
- Install the lever. Install bolt (10) that holds lever (11) in position on the valve.
- Install valve assembly (12) and two screws (9) .
- Install clip (7) and bolt (6) .
- Position the front cover. Be careful not to damage the thermostat capillary tube.
Note: When the cover is closed, do not allow the thermostat capillary tube to be crimped. If this tube is crimped, the thermostat must be replaced.
Show/hide table
Illustration 2 | g00457928 |
- Connect hoses (3) and (4). Tighten two hose clamps (2). Close front cover (5) .
Show/hide table
Illustration 3 | g00580265 |
- Install twelve screws (1) .
Show/hide table
Illustration 4 | g00457887 |
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Heater Control Valve - Remove
793C Off-Highway Truck Machine Systems Rotary Switch (Fan Speed) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Remove
Procedure To Retrofit A New Brake Valve{4250, 4258, 4266} Procedure To Retrofit A New Brake Valve{4250, 4258, 4266}
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Relief Valve (Main)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory System Troubleshooting
793C Off-Highway Truck Machine Systems Heater Coil - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
793C Off-Highway Truck Machine Systems Resistor (Cab Fan Speed) - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Install
65E, 75E, 85E and 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
793C Off-Highway Truck Machine Systems Thermostat Switch (Cab) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Charge Relief Valve - Test and Adjust
793C Off-Highway Truck Machine Systems Rocker Switch (Backup Light) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Crankcase Guard - Remove and Install
793C Off-Highway Truck Machine Systems Toggle Switch (Brake Retraction) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Remove
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Hydraulic Component Operation
793C Off-Highway Truck Machine Systems Rocker Switch (Ether Starting Aid) - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
793C Off-Highway Truck Machine Systems Service Meter - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Coupler Cylinder