Rocker Switch (Ether Starting Aid) - Remove and Install
Removal Procedure
- Remove top (1) of the transmission selector lever.
Show/hide table
Illustration 1 | g00455745 |
- Remove eight screws (2) .
Show/hide table
Illustration 2 | g00456152 |
- Remove rear panel assembly (3) .
- Remove two screws (4) from the rocker switch.
Show/hide table
Illustration 3 | g00459639 |
- Reposition front panel assembly (5) in order to access the connections that are located on the underside of the front panel.
- Disconnect electrical connections (7) and (8) .
Note: Mark the electrical connections for installation purposes.
Show/hide table
Illustration 4 | g00459640 |
- Remove rocker switch (6) of the ether starting aid.
Installation Purposes
- Install rocker switch (6) of the ether starting aid.
Show/hide table
Illustration 5 | g00459640 |
- Connect electrical connections (7) and (8) .
- Position front panel assembly (5) .
Show/hide table
Illustration 6 | g00459639 |
- Install two screws (4) on the rocker switch.
- Install rear panel assembly (3) .
Show/hide table
Illustration 7 | g00456152 |
- Install eight screws (2) .
Note: Tighten the screws to a torque of 9 ± 3 N·m (6.6 ± 2.2 lb ft).
- Install top (1) of the transmission selector lever.
Show/hide table
Illustration 8 | g00455745 |
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Hydraulic Component Operation
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Remove
793C Off-Highway Truck Machine Systems Toggle Switch (Brake Retraction) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Crankcase Guard - Remove and Install
793C Off-Highway Truck Machine Systems Rocker Switch (Backup Light) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Charge Relief Valve - Test and Adjust
793C Off-Highway Truck Machine Systems Thermostat Switch (Cab) - Remove and Install
793C Off-Highway Truck Machine Systems Heater Control Valve - Install
793C Off-Highway Truck Machine Systems Heater Control Valve - Remove
793C Off-Highway Truck Machine Systems Rotary Switch (Fan Speed) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
793C Off-Highway Truck Machine Systems Service Meter - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Coupler Cylinder
793C Off-Highway Truck Machine Systems Rocker Switch (Throttle Backup) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement System
793C Off-Highway Truck Machine Systems Wiper Control Valve - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Speed Sensor (Torque Converter Output)
793C Off-Highway Truck Machine Systems Dimmer Switch - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Electrical Component Operation
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Pump
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Servo Piston Assembly