Rotary Switch (Fan Speed) - Remove and Install
Removal Procedure
- Loosen set screw (1) in knob (2). Remove knob (2) .
Show/hide table
Illustration 1 | g00459092 |
- Remove twelve screws (3) .
- Slightly open front cover (6). Open the front cover enough to loosen hose clamps (5). Open the front cover enough to disconnect hose (4) .
Show/hide table
Illustration 2 | g00459134 |
- Put the front cover aside. Be careful not to damage the thermostat capillary tube.
Note: When the cover is opened, do not allow the thermostat capillary tube to be crimped. If this tube is crimped, the thermostat must be replaced.
Show/hide table
Illustration 3 | g00457928 |
- Identify five electrical connections (8) on the rotary switch. Disconnect the harness.
Show/hide table
Illustration 4 | g00459135 |
- Remove the nut on the front side of the cover. Remove rotary switch (7) .
Installation Procedure
- Install rotary switch (7). Install the nut on the front side of the cover.
Show/hide table
Illustration 5 | g00459135 |
- Identify five electrical connections (8) on the rotary switch. Connect the harness.
- Position the front cover for installation. Be careful not to damage the thermostat capillary tube.
Note: When the cover is open, do not allow the thermostat capillary tube to be crimped. If this tube is crimped, the thermostat must be replaced.
Show/hide table
Illustration 6 | g00457928 |
- Connect hose (4). Tighten hose clamps (5). Close front cover (6) .
Show/hide table
Illustration 7 | g00459134 |
- Install twelve screws (3) .
Show/hide table
Illustration 8 | g00459092 |
- Install knob (2). Tighten set screw (1) in knob (2) .
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Remove
Procedure To Retrofit A New Brake Valve{4250, 4258, 4266} Procedure To Retrofit A New Brake Valve{4250, 4258, 4266}
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Relief Valve (Main)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory System Troubleshooting
793C Off-Highway Truck Machine Systems Heater Coil - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
793C Off-Highway Truck Machine Systems Resistor (Cab Fan Speed) - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Install
65E, 75E, 85E and 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory Tachometer - Adjust
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil
793C Off-Highway Truck Machine Systems Heater Control Valve - Remove
793C Off-Highway Truck Machine Systems Heater Control Valve - Install
793C Off-Highway Truck Machine Systems Thermostat Switch (Cab) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Charge Relief Valve - Test and Adjust
793C Off-Highway Truck Machine Systems Rocker Switch (Backup Light) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Crankcase Guard - Remove and Install
793C Off-Highway Truck Machine Systems Toggle Switch (Brake Retraction) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Remove
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Hydraulic Component Operation
793C Off-Highway Truck Machine Systems Rocker Switch (Ether Starting Aid) - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter