Inlet Manifold
3003 Engine
The inlet manifold and the valve mechanism cover on the 3003 engine are the same part. Refer to the Specifications Module, "Valve Mechanism Cover" topic for additional information.
3013, 3014, and 3024 Engines
Show/hide table
Illustration 1 | g00456676 |
Inlet manifold and components for installation |
(1) Mounting bolts
- The 3013 engine has two long bolts and four shorter bolts. Tighten the mounting bolts to the following torque. ... 10 N·m (90 lb in)
- The 3014 and 3024 engines have two long bolts and six shorter bolts. Tighten the mounting bolts to the following torque. ... 14 N·m (10 lb ft)
Note: Two different lengths of bolts are used. Be sure that the correct length of bolt is installed in the holes.
(2) Washer
(3) Inlet manifold
(4) Roll pin
(5) Gasket
(6) Spacer plate
(7) Gasket
(8) Cylinder head
Caterpillar Information System:
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory System Troubleshooting
793C Off-Highway Truck Machine Systems Heater Coil - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs
793C Off-Highway Truck Machine Systems Resistor (Cab Fan Speed) - Remove and Install
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Install
65E, 75E, 85E and 95E Agricultural Tractors Sampling Interval and Location of Sampling Valve
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Vibratory Tachometer - Adjust
65E, 75E, 85E and 95E Agricultural Tractors Hydraulic Oil
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler - Remove
793C Off-Highway Truck Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
793C Off-Highway Truck Machine Systems Evaporator Coil - Remove and Install
D7R Track-Type Tractor Power Train Steering and Transmission Control
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Relief Valve (Main)
Procedure To Retrofit A New Brake Valve{4250, 4258, 4266} Procedure To Retrofit A New Brake Valve{4250, 4258, 4266}
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Remove
793C Off-Highway Truck Machine Systems Rotary Switch (Fan Speed) - Remove and Install
793C Off-Highway Truck Machine Systems Heater Control Valve - Remove
793C Off-Highway Truck Machine Systems Heater Control Valve - Install
793C Off-Highway Truck Machine Systems Thermostat Switch (Cab) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Charge Relief Valve - Test and Adjust
793C Off-Highway Truck Machine Systems Rocker Switch (Backup Light) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Crankcase Guard - Remove and Install
793C Off-Highway Truck Machine Systems Toggle Switch (Brake Retraction) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Remove