Wiper Control Valve - Remove and Install
Removal Procedure
Show/hide table
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system. |
- Release the air pressure in the air tank.
Show/hide table
Illustration 1 | g00455745 |
- Remove top (1) of the transmission selector lever.
- Remove eight screws (2) .
Show/hide table
Illustration 2 | g00456152 |
- Remove rear panel assembly (3) .
- Remove locknut (5) from the wiper control valve.
Show/hide table
Illustration 3 | g00460075 |
- Reposition front panel assembly (4) in order to access the connections that are located on the underside of the front panel.
- Disconnect tubes (7), (8), (9), and (10) .
Note: Before the tubes are removed, mark the tubes for installation purposes.
Show/hide table
Illustration 4 | g00460076 |
- Remove wiper control valve (6) .
Installation Procedure
- Install wiper control valve (6) .
Show/hide table
Illustration 5 | g00460076 |
- Connect tubes (7), (8), (9), and (10) .
- Position front panel assembly (4) .
Show/hide table
Illustration 6 | g00460075 |
- Install locknut (5) on the wiper control valve.
- Install rear panel assembly (3) .
Show/hide table
Illustration 7 | g00456152 |
- Install eight screws (2) .
Note: Tighten the screws to a torque of 9 ± 3 N·m (6.6 ± 2.2 lb ft).
- Install top (1) of the transmission selector lever.
Show/hide table
Illustration 8 | g00455745 |
- Refer to Operation and Maintenance Manual, "Starting with an External Air Supply" in order to refill the air tank.
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement System
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Control
793C Off-Highway Truck Machine Systems Rocker Switch (Throttle Backup) - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Coupler Cylinder
793C Off-Highway Truck Machine Systems Service Meter - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Filter
793C Off-Highway Truck Machine Systems Rocker Switch (Ether Starting Aid) - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Hydraulic Component Operation
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Radiator - Remove
793C Off-Highway Truck Machine Systems Toggle Switch (Brake Retraction) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Crankcase Guard - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Speed Sensor (Torque Converter Output)
793C Off-Highway Truck Machine Systems Dimmer Switch - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Electrical Component Operation
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Pump
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Servo Piston Assembly
D250E Series II and D300E Series II Articulated Trucks Machine Systems Brake Accumulator (Service) - Remove and Install
793C Off-Highway Truck Machine Systems Pump Drive Shaft (Hydraulic) - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Rotator
793C Off-Highway Truck Machine Systems Drive Shaft Guard - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train General Information