Drive Shaft Guard - Remove and Install
Start By:
- Install the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
Show/hide table
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
Note: The pump drive shaft has been removed for photographic purposes.
- Remove three bolts (2), the three washers, and guard (1).
Show/hide table
Illustration 2 g00460592 - Remove three bolts (5), the three washers, and guard (3).
- Remove three bolts (4), the three washers, and guard (6).
Show/hide table
Illustration 3 g00460593 - Remove four nuts (8), the four washers, and support assembly (7).
Show/hide table
Illustration 1 | g00460591 |
- Install support assembly (7), the four washers, and four nuts (8).
Note: When nuts (8) are installed, tighten the bolts to a torque of
105 ± 20 N·m (77.4 ± 14.7 lb ft) .Show/hide tableIllustration 5 g00460592 - Install guard (6), the three washers, and three bolts (4).
Note: When bolts (4) are installed, tighten the bolts to a torque of
47 ± 9 N·m (34.6 ± 6.6 lb ft) . - Install guard (3), the three washers, and three bolts (5).
Note: When bolts (5) are installed, tighten the bolts to a torque of
47 ± 9 N·m (34.6 ± 6.6 lb ft) .Show/hide tableIllustration 6 g00460591 - Install guard (1), the three washers, and three bolts (2).
Note: When bolts (2) are installed, tighten the bolts to a torque of
105 ± 20 N·m (77.4 ± 14.7 lb ft) .
Show/hide table
Illustration 4 | g00460593 |
End By:
- Disconnect the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
Caterpillar Information System:
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Rotator
793C Off-Highway Truck Machine Systems Pump Drive Shaft (Hydraulic) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Brake Accumulator (Service) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Servo Piston Assembly
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Pump
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Systems Electrical Component Operation
793C Off-Highway Truck Machine Systems Dimmer Switch - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Speed Sensor (Torque Converter Output)
793C Off-Highway Truck Machine Systems Wiper Control Valve - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement System
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Control
793C Off-Highway Truck Machine Systems Rocker Switch (Throttle Backup) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Test
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train General Information
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
793B Off-Highway Truck Power Train General Information
789C Off-Highway Truck Power Train Power Train Electrical System
793B Off-Highway Truck Warning Signs and Labels
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Main Relief Valve - Test and Adjust
793C Off-Highway Truck Machine Systems Electronic Control (Engine Shutdown) - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Lockup Clutch)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble