Fuel Ratio Control - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | FT-1820     | 夹具组件     | 1     |
B     | 1P-1855     | 挡圈钳     | 1     |
C     | 6V-9072     | 导杆     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 检查 O 型密封圈和膜片的状况。 如果 O 型密封圈或膜片磨损或损坏,则应使用新零件更换。
- 将弹簧 (1) 和挡圈 (2) 安装到壳体 (3) 中。
Show/hide table
图 1 | g00460801 |
- 将 O 型密封圈 (6) 和弹簧 (5) 安装到阀门延长杆 (7) 中。 将杆 (4) 安装到阀门延长杆 (7) 中。 使用螺母 (9) ,将阀门延长杆 (7) 固定到挡圈 (8) 上。
Show/hide table
图 2 | g00460828 |
- 将杆 (4) 和挡圈 (8) 安装到壳体 (3) 中。
Show/hide table
图 3 | g00460830 |
- 将膜片 (12) 、垫圈 (11) 和弹簧 (10) 安装到挡圈 (8) 上。
Show/hide table
图 4 | g00460912 |
- 将盖 (13) 安装到壳体 (3) 上。 使用两根螺栓和垫圈固定盖 (13) 。
Show/hide table
图 5 | g00460914 |
Show/hide table
图 6 | g00460917 |
- 将 O 型密封圈 (15) 安装到盖 (14) 上,然后将盖 (14) 安装到盖 (13) 上。 使用两根螺栓固定盖 (14) 。
注: 有关燃油比控制阀的调节步骤的更多信息,请参考测试和调整, "燃油系统"。
End By: 安装燃油比控制阀。 请参考 解体与组装, "燃油比控制阀 - 安装"。
Caterpillar Information System:
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Lockup Clutch)
793C Off-Highway Truck Machine Systems Electronic Control (Engine Shutdown) - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Main Relief Valve - Test and Adjust
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
793B Off-Highway Truck Warning Signs and Labels
789C Off-Highway Truck Power Train Power Train Electrical System
793B Off-Highway Truck Power Train General Information
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Test
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
793C Off-Highway Truck Machine Systems Drive Shaft Guard - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake Discs - Check
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Upshift and Downshift)
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Install
793C Off-Highway Truck Machine Systems Electronic Flasher Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
793C Off-Highway Truck Machine Systems Wiper Shaft - Remove and Install
D7R Track-Type TractorPower Train Power Train Hydraulic System
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Transmission Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine and Torque Converter - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Control Neutral - Adjust
793C Off-Highway Truck Machine Systems Screen (Hoist Pump) - Disassemble