Electronic Control (Engine Shutdown) - Remove and Install
Removal Procedure
- Remove top (1) of the transmission selector lever.
Show/hide table
Illustration 1 | g00455745 |
- Remove eight screws (2) .
Show/hide table
Illustration 2 | g00460812 |
- Remove rear panel assembly (3) .
- Reposition front panel assembly (4) .
- Disconnect the electrical connection.
Show/hide table
Illustration 3 | g00460815 |
- Remove two bolts (5) and two lockwashers (6) .
- Remove electronic control (7) for the engine shutdown.
Installation Procedure
- Install electronic control (7) for the engine shutdown.
Show/hide table
Illustration 4 | g00460815 |
- Install two lockwashers (6) and two bolts (5) .
- Connect the electrical connection.
- Position front panel assembly (4) .
Show/hide table
Illustration 5 | g00460812 |
- Install rear panel assembly (3) .
- Install eight screws (2) .
Note: Tighten the screws to a torque of 9 ± 3 N·m (6.6 ± 2.2 lb ft).
- Install top (1) of the transmission selector lever.
Show/hide table
Illustration 6 | g00455745 |
Caterpillar Information System:
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Main Relief Valve - Test and Adjust
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Disassemble
793B Off-Highway Truck Warning Signs and Labels
789C Off-Highway Truck Power Train Power Train Electrical System
793B Off-Highway Truck Power Train General Information
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Test
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Remove
793C Off-Highway Truck Machine Systems Drive Shaft Guard - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Rotator
793C Off-Highway Truck Machine Systems Pump Drive Shaft (Hydraulic) - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Lockup Clutch)
3304B and 3306B Engines for Caterpillar Built Machines Fuel Ratio Control - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake Discs - Check
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Upshift and Downshift)
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Install
793C Off-Highway Truck Machine Systems Electronic Flasher Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
793C Off-Highway Truck Machine Systems Wiper Shaft - Remove and Install
D7R Track-Type TractorPower Train Power Train Hydraulic System
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Transmission Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Cylinder - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine and Torque Converter - Remove