The Radiator Cowling May Cause Interference With A Mounting Bolt For The Fender
Usage:
OFF-HIGHWAY TRUCK797 (5YW1-221) OFF-HIGHWAY TRUCK
Problem:
Figure 1.
A bolt that is used on the fender support for fender (1) may come into contact with radiator cowling (2) causing a rattling sound.
Solution:
Figure 2.
Fender support (3) is located on the underside of fender (1). Refer to View A in Illustration 3 for the location of the mounting bolt.
Figure 3.
The clearance between bolt (4) and radiator cowling (2) should be checked when the machine is first assembled. If there is interference, then it should be fixed at that time.
A hole (X) that is large enough in diameter to allow bolt (4) of fender support (3) to pass through will need to be drilled or cut into radiator cowling (2).
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
The Maintenance Interval For The Differential Magnetic Plug Has Changed The Maintenance Interval For The Differential Magnetic Plug Has Changed
Revised Torque Values For Front Strut Mounting Nuts Revised Torque Values For Front Strut Mounting Nuts
Shimming Procedure For The 152-3601 Steering Cylinder Shimming Procedure For The 152-3601 Steering Cylinder
Wiper Seals Are Becoming Dislodged On The Front And Rear Suspension Cylinders Wiper Seals Are Becoming Dislodged On The Front And Rear Suspension Cylinders
Shimming Procedure For The Two 150-9164 Transmission Output Speed Sensors On The 797 Off-Highway Truck Shimming Procedure For The Two 150-9164 Transmission Output Speed Sensors On The 797 Off-Highway Truck
The Locknut On The 152-4811 Hydraulic Filter And The 147-6624 Oil Filter Is Not Installed Correctly After The Filter Elements Have Been Serviced The Locknut On The 152-4811 Hydraulic Filter And The 147-6624 Oil Filter Is Not Installed Correctly After The Filter Elements Have Been Serviced
Filter Elements Are Being Installed In The Wrong Oil Filters During Service Filter Elements Are Being Installed In The Wrong Oil Filters During Service
Rear Axle Lubrication Motor Leakage Issues Rear Axle Lubrication Motor Leakage Issues
Front And Rear Suspension Cylinder Nitrogen And Oil Charging Procedure Changes Front And Rear Suspension Cylinder Nitrogen And Oil Charging Procedure Changes
New Information Is Now Available For The 3524B Engine Coupling New Information Is Now Available For The 3524B Engine Coupling
New Information Is Now Available For The 3524B Engine New Information Is Now Available For The 3524B Engine
Some Rear Suspension Cylinders May Have Oversize Bores For The Eye Bearings Some Rear Suspension Cylinders May Have Oversize Bores For The Eye Bearings
Maintenance Interval For The 179-0164 Magnets That Are In The Differential Housing Maintenance Interval For The 179-0164 Magnets That Are In The Differential Housing
Service Replacement Screen Now Available For The 172-2395 Hydraulic Oil Screen Service Replacement Screen Now Available For The 172-2395 Hydraulic Oil Screen
VIMS Displays "AUTO LUBE LO" Warnings VIMS Displays "AUTO LUBE LO" Warnings
Fuel Filters Should Not Be Pre-Filled Before Installation Fuel Filters Should Not Be Pre-Filled Before Installation
Contact The Factory When Replacing Components In The Radiator Cooling Fan System Contact The Factory When Replacing Components In The Radiator Cooling Fan System
Pulley Misalignment Is Causing The Alternator Belt To Fail Pulley Misalignment Is Causing The Alternator Belt To Fail
Inspect New Suspension Links After 50 Hours Of Initial Service Inspect New Suspension Links After 50 Hours Of Initial Service
Filter Element Needs To Be Removed From 797 Off-Highway Truck Parts Stock Filter Element Needs To Be Removed From 797 Off-Highway Truck Parts Stock
The 152-4811 Hydraulic Filter And The 147-6624 Oil Filter Are Being Assembled Incorrectly After Servicing The 152-4811 Hydraulic Filter And The 147-6624 Oil Filter Are Being Assembled Incorrectly After Servicing
The Hydraulic Base Of The 160-7752 Oil (Pump Case Drain) Filter May Be Installed Incorrectly The Hydraulic Base Of The 160-7752 Oil (Pump Case Drain) Filter May Be Installed Incorrectly
Inspect New Suspension Links After 50 Hours Of Initial Service Inspect New Suspension Links After 50 Hours Of Initial Service
Inspect New Rear Suspension Cylinder Joints After 50 Hours Of Initial Service Inspect New Rear Suspension Cylinder Joints After 50 Hours Of Initial Service