1997/12/15 Caterpillar


Revised Testing & Adjusting Manual, SENR6719-01, 938G Wheel Loader And IT38G Integrated Toolcarrier Traction Control System, Now Available {0374}

Usage:


938G (4YS, 6WS, 8RS) Wheel Loaders, IT38G (7BS, 1CW) Integrated Toolcarriers

A revised Testing and Adjusting Service Manual for the 938G Wheel Loader and IT38G Integrated Toolcarrier, Traction Control System is now available. The revised service manual contains updated adjusting and calibration procedures for the articulation angle position sensor.

The revised service manual can be obtained through normal literature ordering channels, using the form number SENR6719.

Caterpillar Information System:

1997/12/15 Beaded Wiper Seals For Rear Suspension Cylinders Increase Service Life {7201,7213}
1997/12/15 Improved Rear Suspension Cylinder Seal Package Now Available {7201,7213}
1997/12/15 Proper Tensioning Of Alternator V-Belt {1807,1800,1357}
1997/12/08 Lubricant Available For Use On Door Latches{7308}
1997/12/08 Updated Clipping Method Improves Durability Of Fan Motor Inlet Tube Assemblies{5057}
1997/12/08 New Metering Pump Group Improves Steering Control{4312}
1997/12/08 Serviceable Transmission Control Switches And New Improved Retention Bolts Are Available For The 123-7406 And 132-3110 Steering Wheel Groups{3171}
1997/12/08 New Torque Converters Have Improved Output Shaft Bearings{3101,3135,3130}
1997/12/08 New Hose Clamp For The Air Inlet Hose Has Improved Durability{1071}
1997/12/08 Improved Latch Pin For Telehandler All Weather Cab{7308}
1997/12/08 New Tow Hitch Available{7111,5133,7116,7555,7562}
1997/12/08 New Maintenance Of Wear Pads Improves Service Life{6460}
1997/12/15 Caterpillar Extended Life Coolant (ELC) Is The Standard Factory Fill For The Engine Cooling System On Machines Built At The Sagami, Japan Factory {1395}
1997/12/22 Special Instruction, SEHS9967-01, Available For 24H Motor Grader Assembly Instruction {0374,7000,7960}
1997/12/22 Recommended Tire And Rim Usage {4201,4202,4203}
1997/12/22 Brake Purge Ports Added To Improve Brake Serviceability {4251}
1997/12/22 New Autoshift Transmission Available {3030,3168,7459}
1997/12/22 New Screen Covers For Hoods And Side Panel Louvers Now Available To Prevent Debris And Snow Ingress {7315,1151}
1997/12/22 Revised Systems Operation Testing And Adjusting Manual, SENR5890-02, Transmission Electronic Control System, Now Available {0375,3168}
1997/12/22 New Hydrostatic Drive Pump Group Has Stronger Head {3203}
1997/12/22 Eye End (Brake Cable) Attachment Pin And Related Hardware Available {4267}
1997/12/22 Removing Trapped Air In Hydraulic Lines And Auxiliary Attachments In Order To Prevent Drift {5057,5116,6408}
1997/12/22 New Tightening Specification For "Spin-on" Oil Filter Assembly {1306,1308}
1997/12/22 Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.