New Hose Clamp For The Air Inlet Hose Has Improved Durability{1071}
Usage:
824G (4SN) Wheel Tractors, 825G (6RN) Soil Compactors, 826G (7LN) Landfill Compactors, 980G (9CM, 2KR, 2SR) Wheel Loaders
Description of Change: A new stronger hose clamp is now used on the turbocharger air inlet hose. The new clamp, which is wider than the former hose clamp, provides a larger clamping surface and improves service life of the clamp.
NOTE: Tighten 141-7152 Clamp Assembly (1) to a torque of 13 ± 4 N·m (9.56 ± 2.94 lb ft)
Illustration 1.
114-8144 Air Lines Group.
(1) 141-7152 Clamp Assembly.
Adaptable To: The new 141-7152 Clamp Assembly (1) replaces the former 3E-7424 Clamp (not canceled) and is adaptable to first production for the machines listed.
Caterpillar Information System:
1997/12/08 Improved Latch Pin For Telehandler All Weather Cab{7308}
1997/12/08 New Tow Hitch Available{7111,5133,7116,7555,7562}
1997/12/08 New Maintenance Of Wear Pads Improves Service Life{6460}
1997/12/08 An Improved Seal Package Now Available For Tailgate Cylinders{5107,7271}
1997/12/08 New Foot Actuator Switch For Differential Lock Improves Reliability{3270,1435,3258,3264}
1997/12/08 Wiggins Fast Fill Connectors For 793C Off-Highway Trucks{7513}
1997/12/08 New Brake Oil Temperature Sender Used In Some Non VIMS Off-Highway Trucks For Improved Accuracy{7489}
1997/12/08 New U-Cup Seal In Front And Rear Suspension Cylinder Groups Increases Service Life{7201}
1997/12/08 Steering Accumulator Charging Valve Rotated To Improve Serviceability{4304,4300,4307,4331,4332}
1997/12/08 New Custom Product Support Literature Is Available For 789B Trucks Equipped With 1Q-5845 Heated Brake Actuation Lines Group{0374,4257}
1997/12/08 New Custom Product Support Literature Is Available For 785B Trucks Equipped With Oil Cooler Lines Group{0374,1365}
1997/12/08 New Custom Product Support Literature Is Available For 773B And 775B Trucks Equipped With 3Z-6185 Fuel Heater Group{0374,1296}
1997/12/08 New Torque Converters Have Improved Output Shaft Bearings{3101,3135,3130}
1997/12/08 Serviceable Transmission Control Switches And New Improved Retention Bolts Are Available For The 123-7406 And 132-3110 Steering Wheel Groups{3171}
1997/12/08 New Metering Pump Group Improves Steering Control{4312}
1997/12/08 Updated Clipping Method Improves Durability Of Fan Motor Inlet Tube Assemblies{5057}
1997/12/08 Lubricant Available For Use On Door Latches{7308}
1997/12/15 Proper Tensioning Of Alternator V-Belt {1807,1800,1357}
1997/12/15 Improved Rear Suspension Cylinder Seal Package Now Available {7201,7213}
1997/12/15 Beaded Wiper Seals For Rear Suspension Cylinders Increase Service Life {7201,7213}
1997/12/15 Revised Testing & Adjusting Manual, SENR6719-01, 938G Wheel Loader And IT38G Integrated Toolcarrier Traction Control System, Now Available {0374}
1997/12/15 Caterpillar Extended Life Coolant (ELC) Is The Standard Factory Fill For The Engine Cooling System On Machines Built At The Sagami, Japan Factory {1395}
1997/12/22 Special Instruction, SEHS9967-01, Available For 24H Motor Grader Assembly Instruction {0374,7000,7960}
1997/12/22 Recommended Tire And Rim Usage {4201,4202,4203}