Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
Usage:
Machines Using The 3E-8825 Lamp In High Vibration Applications
A vibration resistant LED (Light Emitting Diode) is available for use in back-lit rocker switches. The replacement kit includes a LED and a clear dispersion filter.
The new 126-1711 Diode Kit can replace the former 3E-8825 Lamp in applications where life of the lamp may have been affected by high vibration levels. The new 126-1711 Diode Kit includes a LED and a clear dispersion filter. The clear filter replaces the translucent filter and the LED replaces the lamp. The 3E-8825 Lamp continues to be a serviced item.
NOTE: Observe polarity when installing the LED. Otherwise, the LED will not will not allow current to flow and will not light.
Caterpillar Information System:
1996/09/16 Snap Ring Retains Rod Wiper Seal In Several Hydraulic Cylinder Groups {7562,4303,5102,5104,5105,5106,5108,5141,5303,5352,5356,5452,5457,5458,5468,5555}
1996/09/16 New Hinged Window Used In Right Front Side Of Operators Cab Allows Increased Air Circulation {7310}
1996/09/16 New Lift Cylinder Group Uses Piston For Internal Stop {5102,7562}
1996/09/16 Rotated Extension Stick Cylinder Protects Cylinder Port {5057}
1996/09/16 Brake Components Resized To Improve Heat Capacity {4250,4251}
1996/09/16 New Transmission Bearing Improves Surface Fatigue Life {3030}
1996/09/09 A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks{1101}
1996/09/09 Do Not Wash Hot Fuel Injection Pump With Cold Water{1251}
1996/09/09 A New Seal For Brake Piston Plug In Front Brake Groups (Caliper Disc) Has Been Released For Service Repair{4251,7555}
1996/09/09 New Plate Used For Tightening Fan Belts Which Use Alternator Assembly Belt Tighteners{1400,1358,1357}
1996/09/09 New Parts Available To Eliminate Wear Between The Oil Cooler Bonnet And The Elbow{1378,1380}
1996/09/09 Engine Block Provides Improved Grounding To Frame Grounding Cable{1201,1405,1406,7423}
1996/09/16 New Plastic Outlet Sleeve Used On 3208 Engines {1380}
1996/09/16 New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/16 Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23 Improved Radiator Shunt Hose Routing/Fittings Allows Common Hose{1380}
1996/09/23 Improved Air Compressor Bracket Eliminates Excessive Clearance{1803}
1996/09/23 New Wheel Assembly Used To Improve Service Life{4208}
1996/09/23 Fittings (Grease Relief) Should Be In Place When Front Suspension Group Is Charged With Nitrogen{7201}
1996/09/23 Orifices Available to Adjust Steering Times{4307}
1996/09/23 Procedure And Maintenance Interval For Cleaning Transmission Suction Screen And Magnetic Screen Tube Assembly{3030,7526}
1996/09/23 Pattern Established For Bolt Torque Of Air Starting Motor{1451}
1996/09/23 Water Temperature Regulator (Low Leak) Adaptable To 3208 Engines{1355}
1996/09/23 Help Available For PC Based Service Tools Used For All Electronic Engines{1902}