Pump Drive Lube Hose Assembly Prevents Leaks Due To Vibration {5057,5084}
Usage:
Challenger 35 (8DN),
Challenger 45 (1DR) Agricultural Tractors
Description of Change: A new hose assembly is used to eliminate tube cracks and associated oil leaks due to vibration. The new hose is a part of the 108-1916 Hydraulic Arrangement. The hose directs case drain oil to lubricate and cool the implement gears.
Adaptable To: The new 126-5999 Hose Assembly (A) replaces the former 110-1511 Tube Assembly. See the illustration for part location. The new 126-5999 Hose Assembly is effective with the Challenger 35 (8DN265) and Challenger 45 (1DR815) Agricultural Tractors. The 126-5999 Hose Assembly is adaptable to all earlier machines.
Caterpillar Information System:
1995/11/27 Various Size Orifice Plugs Available Through Parts Department{5050}
1995/11/27 Power Take-Off Lube Hose Assembly Prevents Leaks Due To Vibration{1165,3107,5057,3016}
1995/11/27 New Cold Weather Final Drive Duo Cone Seal Group{4050}
1995/11/20 Larger Air Compressors Available{1803}
1995/11/20 New Automatic Shut Off Switch For Vibratory System Available{5653}
1995/11/20 Service Parts Are Available For The 9T-6148 Accumulator{5077}
1995/11/13 Product Identification Number Effectivity For Caterpillar Machines Equipped With Air Conditioners With R-134a Refrigerant {7320,1809}
1995/11/13 Turn Signal/Hazard Switch Improved {1435}
1995/11/13 Screw Terminal Pressure Switches Replaced By Switches With A Deutsch® DT Connector {1400}
1995/11/13 Grease Interval For Drive Axle Universal Joints {3278}
1995/11/13 New Input Shaft Seal For Pump Drive Improves Service Life {1017}
1995/11/13 New Steering Metering Pump Group Available {4312}
1995/12/04 Water Separator Has Been Added To The 8W-6270 Fuel Lines Group To Help Prevent Corrosion {1263,1274}
1995/12/04 Snow Plow Protection Arrangement Is Available For The H-Series Motor Graders {1051,1055,1068,4257,4285,7251,7257,7267,7273}
1995/12/04 Rear Suspension Cylinder Charge Can Be Checked By Measuring Between The Rear Suspension Cylinger Retaining Pins {7213}
1995/12/04 Engine Control Module (ECM) Atmospheric Pressure Sensor Relocated {1923}
1995/12/04 Possible Sources High Crankcase Blowby From Breather Tube {1317}
1995/12/11 Implement Valve Signal Hose Prevents Leaks Due To Vibration{5057}
1995/12/11 Drawbar Cushion Stops Reduce Noise and Shock{7105,7119}
1995/12/11 Adapter Added To The Oil Cooler Lines Group{1365,1380}
1995/12/11 Correct Rear Axle Housing And Final Drive Oil Levels Improve Service Life{4070}
1995/12/11 Correct Harness Code Connections{3150}
1995/12/11 Improved Shift Lever Switch{3168}
1995/12/11 Improved Arc Suppressors Withstand Additional Vibration and Flexing{7337,1623}