Work Light Improvements To Increase Blade Visibility{1429}
Usage:
120H (6TM, 5FM, 9FN, 4MK, 6YN, 2AN, 3GR, 6NM),
135H (7MM, 8WN, 3YK, 7ZN),
12H (5ZM, 4ER, 4XM, 8MN, 2WR, 2LR),
140H (8JM, 5HM, 2ZK, 9TN, 9ZN, 3FR, 8KM),
143H (1AL),
160H (9JM, 2FM, 9EJ, 3GM, 3HR, 6WM),
163H (5AK),
14H (7WJ),
16H (6ZJ, 3JR) Motor Graders
Work lights on the platform can be turned sideways to shine on ends of blade with the following modifications.
1. Remove the lower bolt (A) holding the harness clip and discard bolt.
2. Install clip on the top bolt (B) that holds the light bracket. This will allow full rotation of the light bracket.
Location of Bolts A and B.
Caterpillar Information System:
1995/10/30 Removal Procedure For Sprocket Bearings Increases Service Life Of Final Drive Hub{4054}
1995/10/30 Improvements to Service Information System (SIS) 2.0 Update{0374,0375,0376}
1995/10/23 Dynamometer Testing of Electronic Engines{1913}
1995/10/23 New Blade Cylinder Guards Protect Fitting From Damage In Trenching Applications{5102,5057}
1995/10/23 New Hose Retention Prevents Chafing Of Vibratory And Propel System Hoses{5057,6604}
1995/10/23 Bearings In Rotor Mixing Chamber Improved{6635}
1995/10/23 Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1995/10/23 Rear Edge Of Clam Assembly May Wear In Abrasive Applications{6104,6518}
1995/10/23 Powering and Interfacing to Agricultural Implement Electronic Systems{6800,7300,7332,1408,7490,6331,6304,6330}
1995/10/23 Incident Reports And Parts Involved{0336,0337}
1995/10/16 Adding A Shim Pack To Bottom Hitch Improves Bolt Retention{7100}
1995/10/16 A Change Has Been Made To The 9X-3136 Basic Heater Group To Reduce Leaks{7304}
1995/10/30 New ICM Transmission Control (Actual Gear Switch) Is Available{3168}
1995/10/30 New Follower Assembly Used In Lubrication Pump Group{7540}
1995/10/30 New Parts Service Transmission Sleeve Bearing Does Not Require Sizing{3160}
1995/10/30 New Brake Cooler Tubes For The 8W-9884 Oil Cooler Lines Group Reduce Stress{4257}
1995/10/30 New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30 Proper Adjustment Of Medium Wheel Loader F-Series II Type Cab Door Bumper{7301,7308}
1995/10/30 Product Support For The Caterpillar Fire Suppression System With Automatic Actuation{7401}
1995/10/30 New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/06 Improved Fan Drive Groups and Belt Tightener Groups Need Scheduled Periodic Lubrication {1359}
1995/11/06 Retrofit of EPTC II To Earlier Machines With ICM Transmissions {3168,3150}
1995/11/06 New Duo-Cone Seal Retainer And Backing Plate Reduces Oil Leaks In The Service And Parking Brake Group {4251,7561}
1995/11/06 New Control Group (Timer) Is Available For Use With The Lincoln Lube System {7540}